← Shipping GuideB2B Freight

To-Pay in Courier: What It Means, Who Pays, and When to Ship Freight To-Pay

A hosiery wholesaler in Ludhiana ships three cartons to a retailer in Kanpur, and the retailer says "bhejo, bhada main de dunga". That is a To-Pay consignment. It saves the sender's wallet on the way out and costs the sender properly if it comes back. Here is how it works on ShipSeth, and a check for when to use it.

🧾
ShipSeth Research Desk
Delhi, India · 7 min read

Quick Answer

To-Pay means the receiver pays the freight in cash when the consignment is delivered, instead of the sender paying at booking. On ShipSeth nothing is debited from your wallet when you book To-Pay, but you need ₹500 in it. If the receiver refuses, the forward freight is debited from your wallet, and the return freight is added on top.

What does To-Pay mean in courier?

It means freight is collected from the consignee at delivery. The sender books, the courier carries, and the rider takes the freight from the receiver before handing over the goods.

The term comes from road transport. Every lorry receipt has a box that says who settles the bhada, and a transporter's bilty carries the same two words, "To Pay" or "Paid". It survives because it suits how a lot of Indian wholesale trade runs: the buyer places the order, the buyer bears the freight, and paying at the godown gate is simpler than adding a freight line to every invoice. The short definition is in the glossary.

How is To-Pay different from Paid and COD?

Paid and To-Pay answer who pays the freight. COD answers who pays for the goods. People mix up the last two because the rider collects cash in both.

Paid (prepaid)CODTo-Pay
Who pays the freightYou, from the walletYou, from the walletThe receiver, in cash to the rider
What the rider collectsNothingThe goods amount you setThe freight on your quote, rounded to the rupee
Wallet at bookingFreight debited when the AWB is generatedFreight debited when the AWB is generatedNothing debited; ₹500 balance needed to book
If delivery failsYou pay the return legYou pay the return leg; no COD is collectedForward freight debited when RTO starts, plus the return leg
On the LRFreight payment: PaidFreight payment: Paid, COD amount filled inFreight payment: To-Pay
Money back to youNoneCOD remittance, every Tuesday and FridayNone; the cash is the freight

One rule follows from the last row. A ShipSeth booking cannot be COD and To-Pay at once: set To-Pay and there is no goods amount to enter. If a buyer wants to pay for the goods and the freight at the door, book it COD and put the freight inside the COD amount. The COD remittance guide covers when that money reaches you.

What happens to my wallet on a To-Pay booking?

Nothing is debited at booking. The wallet only has to hold ₹500, and it is charged the freight only if the consignment turns back.

On a Paid booking the freight leaves the wallet the moment the AWB is generated. To-Pay skips that step. Instead the booking checks for a minimum ₹500 balance; below that, it stops with "Minimum wallet balance of ₹500 is required to book to-pay shipments" and you recharge first.

The ₹500 is a floor, not a deposit. Nothing is held. It is there because a To-Pay shipment that fails has to be paid for by someone, and that someone is you:

  • Delivered: the receiver pays the rider, and your wallet never moves for that shipment.
  • Refused or undeliverable: when the status turns RTO Initiated, the full forward freight is debited from your wallet. The return leg is then charged on the rate card's RTO direction, exactly as on a Paid shipment. The RTO guide explains that charge.

So a refused To-Pay consignment costs you more than a refused Paid one, never less. On Paid you had already spent the forward freight; on To-Pay you spend it at the worst moment, plus the To-Pay line if the card carries one.

What does the receiver see at delivery?

A cash amount on the label equal to the freight, and an LR with To-Pay ticked. The rider will ask for that figure before unloading.

Couriers handle To-Pay through the same cash-collection step they use for COD. So the shipping label of a To-Pay shipment reads COD, and the amount printed is the shipment's freight rounded to the rupee, not the value of the goods. If your invoice says ₹48,000 and the freight is ₹700, the label asks for ₹700. That surprises receivers who have only seen COD labels on retail parcels, so say it on the phone before dispatch.

On a B2B consignment, the lorry receipt has a Freight payment box with Paid and To-Pay options, and To-Pay is ticked. The goods-value part of the LR stays on Prepaid with no COD amount. Once the AWB is generated, the order shows the collectible amount; send that number to the receiver along with the AWB or LR number.

When does To-Pay go wrong?

When the receiver was never clear that freight was theirs. Most To-Pay trouble starts there, not with the courier.

  • Online shoppers. A buyer who paid for a kurta online and gets asked for ₹95 by the rider reads it as a scam. Don't use To-Pay for D2C or marketplace orders. Put shipping in the price, or charge it at checkout.
  • New dealers on a first order. A dealer in Moradabad who has not bought from you before has nothing to lose by refusing a heavy consignment. Take the first two orders Paid and move them to To-Pay once they have paid on time.
  • A freight figure nobody agreed. If you told the buyer "around ₹500" and the label asks for ₹760 because the cartons billed on volume, expect an NDR marked refused. Run the cartons through the volumetric weight calculator before you quote the buyer.
  • A deal that changes after booking. ShipSeth lets you switch a booked shipment between prepaid and COD, but a To-Pay shipment keeps its mode. If the buyer now wants it Paid, cancel before pickup and book again.

If a To-Pay consignment does land in NDR as refused, call the receiver before you answer it. Most of these are a disagreement over the amount, and a re-attempt after a two-minute call is far cheaper than the RTO.

How do I book a To-Pay shipment on ShipSeth?

From the normal shipment form, with Payment Mode set to ToPay on the first step.

  1. Agree the freight first. Get a clear yes from the receiver that freight is collected at delivery.
  2. Check Rates. Enter both pincodes and the packages, set Payment Mode to ToPay, and enter the invoice value. There is no COD amount field in this mode. Compare the quotes; the To-Pay line appears on cards that carry one.
  3. Booking Details. Fill in the receiver. A B2B consignment needs the invoice number, invoice amount and the invoice PDF, and an e-way bill number when the invoice is above ₹50,000.
  4. Review & Pay. Confirm. Nothing is debited; the wallet only needs ₹500 in it.
  5. Tell the receiver the amount. Once the AWB is generated, send the collectible amount and the AWB or LR number on WhatsApp or by phone yourself.

To-Pay works only on forward shipments. A reverse pickup is always paid by you, from the wallet.

Paid, COD or To-Pay on one screen

See the To-Pay Quote Before You Book

Free to register, no monthly fee. Every courier's rate is shown before you book, and you pay per shipment from a prepaid wallet.

Frequently Asked Questions

What does To-Pay mean in courier?
To-Pay means the receiver pays the freight to the courier when the goods are delivered, instead of the sender paying at booking. The rider collects the freight in cash at the door. It is common on B2B consignments, where buyer and seller agree that freight is on the buyer.
What is the difference between To-Pay and Paid?
Under Paid, the sender pays freight at booking and the receiver pays nothing at delivery. Under To-Pay, the sender pays nothing at booking and the receiver pays the freight at delivery. The lorry receipt shows which one applies in its freight payment box.
Is To-Pay the same as COD?
No. COD collects the price of the goods for the seller, and that money is remitted to the seller. To-Pay collects the freight for the courier, so none of it comes back to the seller. On ShipSeth a shipment is one or the other: a To-Pay booking cannot carry a COD amount.
Who pays if the receiver refuses a To-Pay shipment?
The sender. On ShipSeth, when a To-Pay shipment turns into a return, the forward freight is debited from your wallet at the moment RTO starts, and the return leg is charged like any other RTO. That is why a To-Pay booking still needs ₹500 in the wallet.
Do I need wallet balance to book a To-Pay shipment?
Yes, but not the full freight. ShipSeth asks for a minimum wallet balance of ₹500 to book a To-Pay shipment. Nothing is debited at booking; the balance is there to cover the freight if the consignment comes back.
Can I change a To-Pay shipment to prepaid after booking?
No. After booking, ShipSeth lets you switch a shipment only between prepaid and COD, or change a COD amount. A To-Pay booking keeps its mode, so cancel and rebook before pickup if the buyer changes the deal.
Is there an extra charge for To-Pay?
On rate cards that carry one, yes: a flat To-Pay line per lorry receipt, which appears on the quote when you set the payment mode to To-Pay. It is part of the freight, so the receiver pays it at the door.