Shipping & Courier Glossary: the words on your label, quote and bill
Fifty-six terms Indian sellers run into the first month they ship, defined the way they actually work on a booking, from the HSN code on the invoice and the AWB on the label to the e-way bill on a truckload.
Quick Answer
The terms that matter most: the AWB is a shipment's tracking number, an NDR is a failed-delivery report you have 48 hours to answer, RTO is the parcel coming back to you, and chargeable weight is the higher of actual and volumetric weight. B2B freight adds the LR, e-way bill and CFT.
हिंदी में पढ़ना है? कूरियर शब्दावली हिंदी में: 53 शब्द, उस जगह के हिसाब से जहाँ वे दिखते हैं (ट्रैकिंग SMS, बिल, बिल्टी, पैकिंग), हर शब्द पर अगला क़दम, और ट्रैकिंग लाइन चिपकाकर शब्द खोजने का डिब्बा।
What do the booking and pickup terms mean?
They name the paperwork and the hand-over: the number that tracks a parcel, the list the courier signs at pickup, and the legs before and after the linehaul.
AWB
Air Waybill numberAn AWB is the tracking number a courier assigns to one shipment when it is booked.
The name comes from air cargo, but every Indian courier uses it for surface parcels too. When you book on ShipSeth, the courier returns the AWB and it is printed as the barcode on the shipping label. The courier scans that barcode at every hub, and each scan becomes a tracking event.
What is an AWB number: which barcode is the AWB, and how it differs from order, LR and e-way bill numbers →हिंदी में पढ़ें: AWB नंबर क्या है →Docket
Docket number, consignment noteA docket is the freight world's word for the consignment note and its number, the B2B equivalent of an AWB.
Transporters and LTL carriers say "docket" where parcel couriers say "AWB". In practice the docket number and the LR number usually refer to the same consignment, and either one is what you quote when you call the carrier about a B2B shipment.
Docket vs AWB vs LR: which number to read out when someone asks for the docket →हिंदी में पढ़ें: डॉकेट नंबर क्या होता है →Manifest
Pickup manifestA manifest is the list of shipments you hand to a courier in one pickup, which the pickup executive signs as proof of hand-over.
It lists each AWB with its consignee, weight and payment mode. Print it, have the pickup person sign it, and keep it. If a parcel later goes missing, the signed manifest proves the courier took it from you.
Make one sheet per courier per pickup. ShipSeth's Pickup Scheduler asks you to keep the manifest copy ready for the pickup executive to sign.
What to put on a pickup manifest, with a printable hand-over sheet →हिंदी में पढ़ें: कूरियर पिकअप और मैनिफेस्ट क्या होता है →Pickup cut-off
A pickup cut-off is the time of day after which a courier will not collect a shipment until the next working day.
Each courier sets its own, and it can differ by pincode and by service. Book after the cut-off and the parcel still goes out, just a day later, so your delivery estimate moves by a day too.
Couriers run a second kind of cut-off for failed deliveries: an NDR instruction has to reach them before their daily cut-off, or the re-attempt slips to the day after. ShipSeth tracks that deadline on every open NDR.
Which day and slot your pickup is requested for, by courier and booking time →हिंदी में पढ़ें: कूरियर पिकअप और मैनिफेस्ट क्या होता है →First mile
The first mile is the leg from your pickup address to the courier's first hub.
It covers the pickup itself, the ride to the origin hub and the first scan. Most "picked up but not moving" complaints are first-mile problems: a missed pickup, a parcel left on the van, or a manifest that was never scanned in.
Some B2B freight rate cards bill the first mile separately as a per-kg pickup charge, so it shows up as its own line on the quote.
First, middle and last mile: which tracking status sits on which leg, and a leg finder →हिंदी में पढ़ें: फ़र्स्ट माइल और लास्ट माइल क्या है →Last mile
The last mile is the leg from the destination delivery centre to the buyer's door.
It is the most expensive and least predictable part of a shipment, because one rider carries dozens of parcels to dozens of addresses. Wrong addresses, unreachable phones and refused COD orders all surface here, and each failed attempt raises an NDR.
Why the last mile is the hardest leg: NDRs, fake attempts, ODA and the charges that belong to it →हिंदी में पढ़ें: फ़र्स्ट माइल और लास्ट माइल क्या है →Shipment cancellation
Cancel booking, cancelled AWBA shipment cancellation voids a booking before the courier picks the parcel up, so the AWB dies and the freight goes back to your wallet.
The line is the first pickup scan. Until then (Drafts, Failed, Label Generated, or Booked with a pickup scheduled) Cancel Order in the row menu works, and the wallet gets back exactly what the booking took, GST included, in the same step. Drafts and failed bookings were never charged, so they refund ₹0. For the few seconds after you press Book, while the courier issues the AWB, the order cannot be cancelled; wait for it to settle.
After pickup the panel refuses, and you should not fight it. A wrong address becomes an NDR you can answer with a new address, and a buyer who changes their mind refuses at the door and the parcel comes back as an RTO. A cancelled AWB is never reused. Clone & Rebook copies the order into a fresh booking, and the rider who turns up from the morning's pickup list does not get the box.
How to cancel a courier booking: a checker that says whether the panel will cancel an order, what comes back, and the support message if it will not →हिंदी में पढ़ें: कूरियर बुकिंग कैसे कैंसिल करें →Reverse pickup
RVP, return pickupA reverse pickup is a new shipment the courier collects from your buyer's address and brings back to your warehouse, usually for a return or exchange.
It is not the same as an RTO. An RTO is the original parcel failing delivery and travelling back; a reverse pickup starts after a successful delivery, when the buyer wants to send the item back. It gets its own AWB and its own freight, priced on the rate card's reverse direction.
On ShipSeth you book one from Orders under Reverse Pickup, in four steps: Check Rates, Pickup Details, Review & Confirm, Done. Reverse pickups are seller-funded, so there is no COD option on them; the freight comes out of your wallet like any forward booking.
Reverse pickup: booking a return, the return tags, the QC charge, and when a return is worth collecting →हिंदी में पढ़ें: रिवर्स पिकअप क्या होता है →Shipping aggregator
Courier aggregator, logistics aggregatorA shipping aggregator is a platform that lets a seller book several courier companies from one account, one wallet and one tracking screen.
The aggregator prices the parcel on every courier that serves the pincode pair, books the one you pick, prints its label and pulls its scans into one timeline. The courier still does the pickup and delivery. NDR instructions, COD payouts on platform couriers and weight disputes run through the aggregator's dashboard. ShipSeth is one: free to register, no monthly fee, prepaid wallet, pay per shipment.
What is a shipping aggregator: one order traced from quote to COD payout, and who handles each problem →हिंदी में पढ़ें: कूरियर एग्रीगेटर क्या होता है →What do the invoice, label and packing-desk terms mean?
These are the words on the paper that travels with the goods and on the sheets your packer works from. Each one has a free ShipSeth tool behind it.
HSN code
Harmonized System of NomenclatureAn HSN code is the number that classifies a product for GST, and the GST rate hangs off it.
Two digits give the chapter, four the heading, and six or eight narrow it down: 6204 is women's woven garments, 6403 is leather footwear. How many digits you print depends on last year's turnover. Up to ₹5 crore, at least 4 digits on invoices to registered buyers; above ₹5 crore, at least 6 digits on every invoice.
Get the code right on the invoice first. When the consignment needs an e-way bill, the same code goes into its Part A, so a wrong HSN on the invoice ends up on two documents.
Source: Notification 78/2020-Central Tax, which sets the HSN digits by turnover in Rule 46.
HSN code finder: the code and GST rate for 70+ common e-commerce products →हिंदी में पढ़ें: HSN कोड क्या होता है →Tax invoice
GST invoiceA tax invoice is the GST document a registered seller issues for a sale, and for goods a copy travels with the consignment.
Rule 46 of the CGST Rules lists what it must carry. The one sellers trip on is the serial number: at most 16 characters, only letters, digits, hyphen and slash, and never repeated within a financial year. Rule 48 asks for three copies for goods: the original for the buyer, the duplicate for the transporter, the triplicate for your file.
On ShipSeth the invoice number and invoice amount go on the Booking Details step. Enter the amount with GST included. That figure decides whether the booking asks for an e-way bill: above ₹50,000 the E-Way Bill field becomes compulsory and you can't reach Review & Pay without it.
Source: Rule 46, CGST Rules (CBIC tax portal); Rule 48, CGST Rules (CBIC tax portal).
GST invoice generator: CGST + SGST or IGST worked out from the two pincodes, as a PDF →हिंदी में पढ़ें: टैक्स इनवॉइस क्या होता है →Shipping label
Courier label, 4x6 labelA shipping label is the sticker on the parcel that carries the AWB barcode, the delivery address and your return address.
The usual size is 4 × 6 inches (101.6 × 152.4 mm) on a thermal roll, and that is the default in ShipSeth's label settings. The same screen offers stickers as small as 2 × 3 inches, A6, and a full A4 page with a GST table. It also lets you leave the receiver's phone number, the invoice value or the item list off the printed label.
Marketplace orders are different. Meesho and Flipkart give you their own label PDF with the tax invoice printed underneath, and that page has to be cut down before it fits a 4x6 roll.
What is a shipping label: what it must show, which size, and fixing a print that comes out cut off →हिंदी में पढ़ें: शिपिंग लेबल क्या होता है →Picklist
Pick listA picklist is the packer's list of every SKU in the day's orders with the total units of each, so each design comes off the shelf once.
It never leaves the godown. The manifest is the one that lists AWBs and goes to the pickup executive for a signature, and the packing slip goes inside a single parcel. Three different sheets, often printed off the same order list.
Say 12 of today's orders are the same kurti in the same size. Packing label by label, that is 12 walks to the rack. With a picklist the packer pulls all 12 in one trip, then packs.
Picklist generator: totals by SKU from your label PDFs, plus a hand-over sheet per courier →हिंदी में पढ़ें: पिकलिस्ट क्या होती है →Courier packaging
3-ply and 5-ply carton, paddingCourier packaging is the outer carton and the filler inside it that keep goods from moving, the part a courier's claims desk checks before it pays for damage.
3-ply is a single-wall carton, fine for clothes, books and non-fragile goods under about 5 kg. 5-ply is double-wall, for heavier goods, electronics over 2 kg and all glass. ShipSeth's terms make packing fit for transit the seller's job, and goods that were inadequately packed are excluded from damage claims.
Padding has a price. Every centimetre of filler adds to L × B × H, and on ShipSeth's B2C cards volumetric weight is that volume ÷ 5,000. A mixer grinder padded 4 cm a side in 5-ply bills at 10.5 kg though it weighs about 4 kg packed.
How to pack a parcel for courier: board and padding per product, and a box planner that shows the slab the carton bills at →हिंदी में पढ़ें: कूरियर के लिए पार्सल कैसे पैक करें →Prohibited and restricted items
Dangerous goods, items not allowed in courierProhibited items are goods no courier booking may carry; restricted items travel only with a courier that has agreed to take them.
ShipSeth's merchant agreement (clause 6) lists the prohibited ones: currency, bullion, cheques and other negotiable instruments, narcotics, weapons, explosives such as firecrackers, live animals, counterfeit goods and anything illegal, plus flammable and corrosive material unless a courier expressly permits it. Restricted: lithium batteries, aerosols, liquids, precious items, alcohol and temperature-sensitive goods.
Batteries, flammables and aerosols are also dangerous goods for air, so they go Surface or not at all. Name the item in Order Items: a power bank booked as "General Goods" is misdeclared, and misdeclared goods get no loss or damage claim.
Prohibited items in courier: the lists, what can't fly, and a can-I-ship-this checker for 28 everyday items →हिंदी में पढ़ें: कूरियर में क्या नहीं भेज सकते →Pincode serviceability
Serviceable pincodeA pincode is serviceable for a courier when that courier delivers there, and the same check says whether COD is allowed and whether the pincode is ODA.
It is decided courier by courier. One courier may deliver to a hill-town pincode on prepaid only, another may not go there at all. So the same delivery pincode can show several courier options on a prepaid order and fewer on a COD one.
ShipSeth runs this check before it shows rates, which is why a courier that can't reach the pincode never appears as an option. Before a COD campaign to an old customer list, run the whole list through the bulk checker and drop the pincodes nobody delivers to.
Pincode not serviceable: what each refusal means, with a check for wrong pincodes in a buyer's address →हिंदी में पढ़ें: पिनकोड सर्विसेबल नहीं है का मतलब →What happens when a delivery fails, and when is COD paid?
A failed attempt raises an NDR, an unanswered NDR becomes an RTO, and COD money only moves once a parcel is actually delivered.
NDR
Non-Delivery ReportAn NDR is the courier's report that a delivery attempt failed, with the reason it gives.
Typical reasons: buyer not available, address incomplete, buyer refused, or COD cash not ready. On ShipSeth an NDR gives you 48 hours to act. You can ask for a re-attempt, correct the address or phone number, or send the parcel back.
Do nothing and the shipment escalates towards RTO. Act after the courier's daily cut-off and the re-attempt happens a day later than you expect.
What is NDR in courier: the right action for each NDR reason, with a triage tool →हिंदी में पढ़ें: NDR क्या होता है →Fake delivery attempt
Fake NDR, nobody came, suspected fake attemptA fake delivery attempt is an NDR the courier records for a doorstep visit that never happened.
The usual giveaway is in the scans, not the remark. ShipSeth reads the courier's own timestamps around every NDR and flags it as a Suspected fake attempt when there was no Out for Delivery scan earlier that day, when the NDR is stamped before 8 am or after 9 pm, or when two separate attempts are logged on one day. Some feeds carry only a date, XpressBees' NDR list among them, so for those only the next signal works: the buyer saying nobody came.
A flagged NDR opens as a high-priority case on the tracking desk, and the next step on it is an escalation to the courier, not a call to the buyer. Your 48-hour NDR clock still runs, so send a re-attempt with "call before delivery" in the instruction. Example: a COD order to Saharanpur shows "Customer not available" at 22:40 with no OFD scan that day. That is two signals. Pick re-attempt, not RTO.
How to tell a fake delivery attempt from a real one, with an NDR triage tool that checks the scan time →हिंदी में पढ़ें: NDR क्या होता है: फ़र्ज़ी कोशिश पर क्या करें →RTO
Return to OriginRTO means the courier is sending the shipment back to the pickup address instead of delivering it.
It follows failed delivery attempts or an instruction from you. The status moves from RTO Initiated to RTO Delivered once the parcel is back with you.
RTO is rarely free. ShipSeth's rate cards price the return leg as its own direction, so a returned parcel usually carries return freight on top of the forward charge you already paid; only couriers that offer free RTO bill ₹0 for it. That is why sellers watch their RTO rate closely, especially on COD orders.
What is RTO in courier: charges, COD reversal and stuck returns →हिंदी में पढ़ें: RTO क्या है →COD remittance
COD remittance is the transfer of cash-on-delivery money, collected by the courier from your buyers, into your bank account.
ShipSeth remits COD twice a week, every Tuesday and Friday, with no deductions from the remitted amount. Orders delivered Wednesday to Friday are paid the following Tuesday, and orders delivered Saturday to Tuesday are paid that Friday.
The 48-hour figure people often attach to COD is a different clock: it is the NDR response window. It has nothing to do with when your money arrives.
How the COD remittance cycle works →हिंदी में पढ़ें: COD कैसे काम करता है →POD
Proof of DeliveryA POD is the record that a shipment reached the consignee: a signed copy of the paperwork on B2B freight, or the courier's delivered scan on a parcel.
On B2B freight it is a physical document. The lorry receipt ShipSeth generates has a POD · Carrier Copy, which the consignee signs and stamps at delivery. Keep it; when a distributor says a carton never arrived, the signed POD settles it.
Parcels rarely carry paper. The courier's "Delivered" event, with its date and time, is the proof, and some couriers also capture a signature, photo or OTP. Ask for the POD before you accept a "not received" complaint on a delivered COD order.
Delivered but not received: getting the courier's proof of delivery, the claim deadline and a support-message checker →हिंदी में पढ़ें: POD क्या होता है →EDD
Expected delivery dateThe EDD is the date a courier expects to deliver a shipment, worked out from the pickup date and the transit days for that pincode pair.
The delivery days next to each courier option on ShipSeth come from one of three places. Delhivery, DTDC and Ekart are asked for their own transit time for your two pincodes; XpressBees days come from its five-zone transit chart; other couriers use the delivery days set in that courier's serviceability rules. That is why one row can say "3–4 days" and the next a flat "4 days" on the same lane. The days count from pickup, not from booking.
After booking, the EDD becomes a deadline. The day after a shipment misses it, ShipSeth flags it on its own; at three days late it is escalated to the courier. A lost-shipment claim must reach support within 15 days of the EDD, so note the date before you start chasing.
What is EDD in courier: where the days come from, which date to tell the buyer, and an EDD date counter →हिंदी में पढ़ें: EDD क्या होता है →Tracking status
Scan status, shipment statusA tracking status is the courier's latest scan of a shipment, saying where the parcel is and whose move it is next.
Every courier writes its own words, and ShipSeth translates each scan into one of nine statuses: Waybill Generated, Pickup Scheduled, Picked Up, In Transit, Out for Delivery, Delivered, NDR, RTO Initiated and RTO Delivered. The scan history on the order keeps the courier's original line, including routine hub scans that never change the status.
Some words mean different things at different couriers. Delhivery's "Dispatched" is out for delivery, while at XpressBees it only means the parcel left a hub. Delhivery's "UD" is a general update, while XpressBees' "UD" is Undelivered. A Delhivery "Pending" is an NDR only when the line names a delivery failure.
Courier tracking status meaning: every scan line explained, with a reader for a pasted tracking history →हिंदी में पढ़ें: In Transit का मतलब क्या है →In transit
Shipment in transit, transit scanIn transit means the courier has picked the parcel up and it is moving between hubs towards the buyer's city, but no delivery rider has it yet.
Couriers write this stage in their own words. "Bagged", "Connected to", "Arrived at hub" and an XpressBees "Dispatched" all land as In Transit on ShipSeth. A parcel from Surat to Lucknow can show four or five of these lines before it reaches the Lucknow delivery centre.
A day with no new scan is normal on a long lane. After two silent days ShipSeth escalates the AWB to the courier. Seven days in transit, or five days after pickup with no hub scan at all, and the parcel is treated as lost; the claim has to go in within 15 days of the expected delivery date.
Courier stuck in transit: when a silent parcel is normal, when to escalate and when to claim →हिंदी में पढ़ें: In Transit का मतलब क्या है →Out for delivery
OFDOut for delivery (OFD) means a rider has left the local delivery centre with the parcel, so the doorstep attempt happens today.
By evening an OFD shipment should read Delivered or NDR. On a COD order, this is the scan to act on: tell the buyer to keep the phone on and the cash ready. Watch the Delhivery wording too. On its delivery leg "Dispatched" means OFD, which is not what the same word means at XpressBees.
If nothing has happened by the next morning, open NDR Management. An NDR with no OFD scan earlier that day, or one stamped late at night, points to an attempt that was never made. Send the AWB to support with both scan times before you accept the NDR reason or answer it.
Courier tracking status meaning: paste a tracking history and the reader flags an NDR with no OFD scan before it →हिंदी में पढ़ें: Out for Delivery और बाक़ी ट्रैकिंग स्टेटस हिंदी में →Damage claim
Damaged parcel claim, transit damageA damage claim asks the courier to pay for goods that reached the buyer, or came back on RTO, broken or spoilt in transit.
On ShipSeth it is raised by email to support within 7 days of delivery, with the AWB, the invoice copy, an unboxing video and photos of the outer box and the damaged item. Support files it with the courier, and what the courier admits is passed through to you.
A claim pays at most the declared invoice value or ₹5,000 per shipment, whichever is lower, unless you chose carrier's risk or bought insurance at booking. Goods that were packed without protection, misdeclared or under-declared are not covered, and neither is lost profit.
Courier parcel arrived damaged: the 7-day window, the evidence couriers accept, and a claim-readiness check that writes the email →हिंदी में पढ़ें: पार्सल टूटा आया? डैमेज क्लेम कैसे करें →Lost shipment
Lost in transit, untraceable, suspected lostA lost shipment is one the courier picked up but can no longer find anywhere in its network, so it will be neither delivered nor returned to you.
ShipSeth does not wait for the courier to admit it. The tracking desk counts the hours since the last scan or status change, and chases the courier on the way. At 120 silent hours after Picked Up, or 168 hours in In Transit, the AWB becomes a Suspected lost case, the highest priority on the desk, and the next step on it is a lost claim. A parcel that is Out for Delivery or in an NDR never reaches that rung, because a known rider or delivery centre has it.
One scan reading "Untraceable from Hub" is not yet a loss. Hubs miscount, the parcel turns up in another bag, and the next line says "Found". Once the courier declares it lost, email support with the AWB and the invoice copy within 15 days of the expected delivery date. Uninsured goods pay the lesser of the declared invoice value or ₹5,000, so the value typed at booking has to match the invoice.
Courier stuck in transit: a checker that says whether a silent parcel is a delay to chase or a lost claim to raise →हिंदी में पढ़ें: In Transit का मतलब: पार्सल को खोया कब मानें →Which terms decide what a shipment costs?
Weight is the biggest one, then the surcharges a rate card adds for remote pincodes, diesel prices and the risk on the goods.
Dead weight
Actual weight, scale weightDead weight is what the packed parcel weighs on a scale, with the box, tape, filler and invoice inside it.
It is one of the two inputs to chargeable weight. Volumetric weight is the other. ShipSeth rate cards bill whichever of the two is higher unless a card is set to bill on dead weight alone, and either way the number you type at booking has to come off a scale after the parcel is sealed. Product weight is not dead weight. A shirt listed at 300 g goes out at about 380 g once it is folded into a mailer with a printed invoice (example figures).
On a shipment of several boxes, the dead weight is the total for all of them: weight per box times the number of boxes. Store orders arrive carrying whatever the store sends. A Shopify order brings the product weights times quantity, which leaves out the packaging. A WooCommerce order brings no weight at all and starts at 0.5 kg. Correct either one before you book, or the courier's hub scale corrects it for you as a weight discrepancy.
Chargeable weight calculator: enter dead weight and box size, see which one bills →हिंदी में पढ़ें: चार्जेबल वेट क्या होता है →Volumetric weight
Dimensional or volume weightVolumetric weight is the weight a courier assigns to a box based on its size: length × breadth × height in cm, divided by the rate card's divisor.
ShipSeth's B2C parcel cards divide by 5,000. A 40 × 30 × 10 cm box therefore weighs 2.4 kg on paper, whatever is inside it. Light, bulky goods such as garments, cushions and foam packaging almost always bill on volume.
Volumetric weight calculator →हिंदी में पढ़ें: वॉल्यूमेट्रिक वज़न कैसे निकालें →Chargeable weight
Chargeable weight is the weight you are billed for: the higher of actual weight and volumetric weight, after the rate card's rounding and minimum.
B2C parcels are priced in weight slabs, so the chargeable weight rounds up to the top of its slab. B2B LTL freight on ShipSeth rounds up to the next whole kg and has a 20 kg minimum.
If the courier re-weighs a parcel and bills more than you declared, that difference is a weight discrepancy, and you can contest it (see below).
Chargeable weight and slab calculator →हिंदी में पढ़ें: चार्जेबल वेट क्या होता है →Weight slab
Base slab, additional slabA weight slab is the step in which a parcel rate card charges weight: a price for the first step, then a fixed price for every further step or part of one.
On ShipSeth's Delhivery B2C cards the first slab is 500 g and each additional slab is another 500 g. A parcel with a chargeable weight of 1.1 kg pays the base slab plus two additional slabs, because 600 g over the base is more than one step. Shave it to 1.0 kg and one additional slab drops off the bill.
That rounding is why a few grams of packing tape can cost a full slab. It is also why the same parcel can price differently across couriers: each card sets its own slab size and its own rate per zone.
See which slab your parcel lands in →हिंदी में पढ़ें: चार्जेबल वेट और वेट स्लैब →Zone
Shipping zone, courier zoneA zone is the band a parcel rate card puts a pickup–delivery pincode pair into, and each zone carries its own slab prices.
Zones are set per courier, not by the government, so the same pair of pincodes can be zone B on one card and something else on another. ShipSeth's Delhivery B2C card uses nine: A Within City, B Regional (up to 500 km, or within the state when distance is unknown), C1 and C2 for metro-to-metro pairs at 501–1,400 km and 1,401–2,500 km, D1 and D2 for the same distance bands when either end is not a metro, E Special Region (the North East states, J&K, Himachal Pradesh and Uttarakhand), F Remote Cities (Leh and Port Blair), and G Rest of India as the catch-all.
A Jaipur seller shipping to a buyer in the same city pays zone A. The same parcel to Guwahati lands in E, and on that card E costs roughly twice what A does for the base slab.
Courier zones explained: how three parcel cards decide the zone, with a zone finder for any city pair →हिंदी में पढ़ें: कूरियर ज़ोन क्या होता है →Air and surface mode
Air courier, surface courier, express modeThe mode says how a parcel travels between the courier's hubs: by flight (air or express) or by truck (surface). Pickup and delivery are by road either way.
Every courier option on the ShipSeth booking screen shows its mode next to the price: Air, Express or Surface, or LTL and PTL for B2B freight. Surface is cheaper and takes more kinds of goods; air only saves days on long lanes, and refuses flammables, aerosols and loose batteries.
Surface rate cards also carry their own heavy-parcel slabs (Delhivery's go up to 10 kg), while express prices every kilo above the first one at a time, so the price gap widens as the box gets heavier.
Air vs surface courier: when air is worth it, what can't fly, and an air-or-surface check →हिंदी में पढ़ें: एयर और सरफेस कूरियर में क्या अंतर है →Weight discrepancy
Weight dispute, reweigh chargeA weight discrepancy is the courier billing a heavier weight than you declared at booking, after re-weighing or re-measuring the parcel at its hub.
On ShipSeth it shows up under Reconciliation as a New Discrepancy, with the weight you entered next to the weight the courier recorded and the extra charge. The clock starts when the discrepancy is posted, not when you booked: each courier has its own dispute window, and the drawer counts down the days left.
You get two buttons. Accept Charges closes it. Raise Claim asks for a reason (weight correct, dimensions correct, package tampered, duplicate charge, or other), your remarks and at least one photo, up to five. Let the window lapse and the discrepancy is auto-accepted. If the courier accepts your claim, the excess is refunded to your wallet; if it rejects, you get a short window to reopen with more proof.
The cheapest dispute is the one you never raise. Photograph every packed box on the scale with the tape measure in frame before pickup, and enter the packed weight, not the product weight.
Courier weight discrepancy: when the charge hits your wallet, the deadlines, and a claim-readiness checker →हिंदी में पढ़ें: वेट डिस्क्रेपेंसी क्या है →ODA
Out of Delivery AreaAn ODA pincode is one outside a courier's regular delivery network, and shipments to it carry an extra ODA charge.
The courier still delivers there, usually through a partner or a less frequent route, and charges for the extra distance. On B2B freight cards the ODA charge is typically per kg with a minimum per consignment. Because it depends on the destination pincode, two shipments of the same weight to the same city can be priced differently.
ShipSeth adds the ODA charge to the quote when it applies, so you see it before booking. To check a pincode courier by courier, use the Serviceability tab on /track-check.
What is ODA in courier: how the charge is built from weight bands, and a band check that shows where it jumps →हिंदी में पढ़ें: ODA क्या होता है →DPH and fuel surcharge
Diesel Price HikeDPH is a freight adjustment that rises with diesel prices, and a fuel surcharge is a fixed percentage of freight for the same purpose.
A DPH clause names a base diesel price per litre. When the actual price moves past a set threshold above that base, freight goes up by an agreed percentage for each step. Some contracts ignore downward moves, and on those DPH only ever adds cost.
A fuel surcharge (FSC) is simpler: a flat percentage on top of freight. Some B2B rate cards carry both, so read them as separate lines on the quote.
DPH and fuel surcharge: count the steps and see the next trigger price →हिंदी में पढ़ें: DPH और फ़्यूल सरचार्ज क्या है →Declared value
Invoice value, shipment valueDeclared value is what you tell the courier the goods are worth when you book: the invoice total, tax included, after discount.
On ShipSeth it is the Invoice Value field in step 1 of the booking form, and the form won't take ₹0. It sets the most a loss claim can pay (the lower of this value and ₹5,000 unless the shipment was insured), the risk-on-value line on B2B freight at carrier's risk, and the e-way bill prompt above ₹50,000.
It is not the COD amount. A ₹4,500 order with ₹500 paid in advance goes as COD Amount ₹4,000 and Invoice Value ₹4,500. Under-declaring saves little: the merchant agreement excludes claims on under-declared goods.
Declared value in courier: what to enter, and a check that gives the Invoice Value and COD Amount for your order →हिंदी में पढ़ें: डिक्लेयर्ड वैल्यू क्या होती है →ROV
Risk on Value, also FOVROV is the charge for who bears the loss if goods are lost or damaged in transit: you (owner's risk) or the carrier (carrier's risk).
Under owner's risk the charge is low or zero, and you carry the loss yourself or through your own insurance. Under carrier's risk the carrier takes on liability and charges a percentage of the declared goods value, with a minimum.
On ShipSeth, choosing carrier's risk on a B2B booking requires a declared insurance value, so the cover is tied to a real sum. FOV (freight on value) is another name some carriers use for the same charge.
Owner's risk vs carrier's risk, and what a lost consignment really pays →हिंदी में पढ़ें: ओनर रिस्क और कैरियर रिस्क क्या है →To-Pay
Freight to pay, To Pay biltyTo-Pay means the receiver pays the freight in cash at delivery, instead of the sender paying it at booking.
The LR shows it in the freight payment box, Paid or To-Pay. It is not COD: COD collects the price of the goods for the seller, while To-Pay collects the freight for the carrier, so none of it is remitted to you.
On ShipSeth a To-Pay booking debits nothing at booking but needs ₹500 in the wallet. If the receiver refuses, the forward freight is debited when the RTO starts, and the return leg is charged as usual.
To-Pay vs Paid vs COD, and a check for which buyers should get To-Pay →हिंदी में पढ़ें: टू-पे क्या होता है →Appointment delivery
Appointment handling, slot deliveryAppointment delivery is a B2B delivery made into a slot the receiving warehouse has booked, and the carrier charges extra for it.
Distribution centres and marketplace warehouses often unload only against a booked slot and a PO number. The carrier holds the cartons until the slot and sends a vehicle at that hour. On B2B freight cards the line is per kg with a minimum, so on a small lot the minimum is what you pay.
ShipSeth quotes every B2B consignment as a normal delivery, so this line is not on the quote. Ask the buyer about slot terms before you book.
B2B freight surcharges: every line on an LTL bill, and a checker for which ones your consignment carries →हिंदी में पढ़ें: फ़्रेट सरचार्ज क्या होते हैं (अपॉइंटमेंट डिलीवरी समेत) →Green tax
Delhi green tax, ECC on a freight billGreen tax is a per-kg line a freight carrier adds when a consignment is picked up from or delivered into Delhi, recovering part of the Environment Compensation Charge Delhi collects from commercial vehicles entering the city.
Delhi collects the charge per truck at its borders under a Supreme Court order of October 2015, and the rates were raised from 1 April 2026. Your cartons ride on that truck with other people's, so the carrier splits it as a per-kg rate with a minimum and bills it once per consignment.
On ShipSeth's B2B cards the trigger is the pincode, not the route. One end in Delhi adds one line; Okhla to Karol Bagh is still one line, not two. Pincodes in Noida, Gurugram, Faridabad and Ghaziabad do not trigger it today, so the same cartons can carry the line from a Wazirpur godown and skip it from a Sector 63 unit.
Example, with illustrative rates of ₹0.50 per kg and a ₹50 minimum: a 180 kg lot from Wazirpur to Indore pays ₹90, and a 60 kg lot pays the ₹50 minimum because 60 × ₹0.50 is only ₹30. The line shows on the quote before you book.
Source: Supreme Court order, 9 October 2015 (M.C. Mehta), setting up the ECC (EPCA archive); SCC Online, revised ECC rates from 1 April 2026, 21 April 2026.
B2B freight surcharges: a checker that shows whether your consignment carries green tax and every other line →हिंदी में पढ़ें: फ़्रेट सरचार्ज क्या होते हैं (ग्रीन टैक्स समेत) →Demurrage
Storage charge at the destination hubDemurrage is a storage charge for goods left at the destination hub after the free days are over.
It starts when the consignee does not take delivery: the shop is shut, the buyer wants to pay first, or a To-Pay party keeps asking for another day. On B2B freight cards it is a percentage of freight with a minimum, counted only after the free period.
No booking quote can include it, since nobody knows on booking day that the cartons will wait. The fix is a call to the consignee before the truck leaves.
What demurrage, appointment and re-attempt charges are, and how to avoid them →हिंदी में पढ़ें: डेमरेज और फ़्रेट सरचार्ज क्या होते हैं →What do the B2B freight terms mean?
B2B freight moves cartons and pallets on documents a parcel never needs, and it is priced per kg by region instead of in weight slabs.
Per-kg matrix pricing
Region matrix, LTL rate gridPer-kg matrix pricing charges B2B freight a rupee rate per kg read from a grid of origin region by destination region, instead of from zones and weight slabs.
The region comes from the state of each pincode. Delhi to Jaipur and Delhi to Lucknow both sit in the same north-to-north cell, so they cost the same per kg even though one drive is far longer. On top of the rate sit two floors: a minimum chargeable weight (20 kg on ShipSeth's LTL cards) and a minimum freight per LR, which is what decides most small consignments.
Example: 45 kg in a ₹10/kg cell is ₹450 of freight. Ship 12 kg on the same lane and you still pay for 20 kg, and if the LR minimum is higher than that, the minimum is what you pay. (Rates here are illustrative, not a ShipSeth quote.)
Per-kg matrix pricing: read the grid and compare it with a slab rate →हिंदी में पढ़ें: पर-किलो रेट क्या है →Minimum freight per LR
LR minimum, minimum chargeable freightThe minimum freight per LR is the smallest freight a B2B carrier will bill on one lorry receipt, however light the consignment is.
It is the second of two floors. The first is weight: on ShipSeth's LTL cards nothing bills below 20 kg chargeable. The second is money: the engine adds the per-LR processing (docket) line to the freight, and if that sum is still short of the card's minimum, the freight line is raised by the gap. You see the raised figure as the freight line on the quote, not as a separate charge.
Example, illustrative rates only: a ₹10/kg cell, ₹75 processing and a ₹500 LR minimum. A 12 kg carton bills as 20 kg, so ₹200 freight plus ₹75 processing is ₹275, and freight goes up by ₹225 to bring the pair to ₹500. A 30 kg lot gets the same ₹500. Only from 43 kg (₹430 + ₹75 = ₹505) does the per-kg rate start deciding the bill.
The practical rule follows from that: three small lots to the same dealer in one week pay the minimum three times. Hold them a day or two and send them on one LR.
Per-kg matrix pricing: a slab-vs-matrix calculator with both minimums built in →हिंदी में पढ़ें: पर-किलो रेट और बिल्टी का न्यूनतम भाड़ा →Handling charge
Heavy-weight handling, handling bandA handling charge is a per-kg line a B2B carrier adds once a consignment's chargeable weight crosses a heavy-weight band.
The rate card lists weight bands, and the chargeable weight of the whole LR picks one. On ShipSeth's Delhivery B2B cards the lower bands are zero, so most consignments never see the line. On the 6 CFT product it stays zero at every weight; on 8 CFT it starts at 400 kg. It shows up on the quote before you book, next to fuel and ROV. Appointment handling and cheque handling are separate lines with their own triggers.
The catch is that the band rate applies to every kilo, not only the ones above the threshold. Example, illustrative rate: at ₹2/kg from 400 kg, a 395 kg LR pays nothing and a 405 kg LR pays ₹810. Bulky cargo can cross the line on volumetric weight alone, so measure the cartons before you assume you are under it.
Don't split one consignment into two LRs just to stay under the band. Each LR pays its own processing line and its own minimum, so put both versions through the line checker on the surcharges guide first.
B2B freight surcharges: a line checker that shows when handling applies →हिंदी में पढ़ें: फ़्रेट सरचार्ज क्या होते हैं →Re-attempt charge
Redelivery charge, second attempt on an LRA re-attempt charge is what a B2B carrier bills when the consignee turns the truck away and the consignment has to go out again after the card's free attempts are used up.
It never shows on the quote you see before booking, because nobody knows yet whether the godown will take the goods. ShipSeth's rate engine keeps the line off every fresh quote for that reason, along with demurrage and cheque handling. When it does apply, it is priced per kilo of chargeable weight with a floor, the same shape as first-mile pickup and appointment handling.
The two Delhivery B2B cards on ShipSeth price it differently. The 6 CFT card has two free attempts, then ₹1/kg with a ₹70 minimum for each extra one. The 8 CFT card has three free attempts, then ₹0.30/kg with a ₹50 minimum. Example: one extra attempt on a 150 kg LR costs ₹150 on the 6 CFT card and ₹50 on 8 CFT. On a 40 kg LR both cards charge their minimum, ₹70 and ₹50. If the truck keeps getting turned back, the goods sit at the hub and demurrage starts.
Most re-attempts on B2B freight come from the same few gate problems: a dealer who shuts on Sunday or for a local market holiday, a mall or warehouse that only receives against a booked slot, a To-Pay party who hasn't agreed the freight figure, or nobody there with the authority to sign the LR. One phone call to the consignee before dispatch settles all four. Parcel NDRs are a separate flow: you answer those on the NDR screen within 48 hours, and that NDR is not this line.
B2B freight surcharges: a line checker with a "may need another attempt" option →हिंदी में पढ़ें: री-अटेम्प्ट और फ़्रेट सरचार्ज क्या होते हैं →B2B vs B2C shipping
B2C shipping sends parcels to consumers, and B2B shipping sends cartons and pallets between businesses.
The difference goes beyond the buyer. On ShipSeth, B2C parcels are priced in weight slabs by zone and ship on a label. B2B freight is priced per kg on a region-to-region matrix, travels on a lorry receipt, needs a tax invoice, and needs an e-way bill when the invoice is above ₹50,000.
B2B vs B2C shipping: which one your consignment goes as, and a parcel-or-cargo checker →हिंदी में पढ़ें: B2B और B2C शिपिंग में अंतर →LTL
Less Than TruckloadLTL freight is a shipment too small to fill a truck, so it shares space with other shippers' cargo and moves through the carrier's hubs.
It suits loads from roughly a few cartons up to a few hundred kilos. You pay per kg for the space you use, with a minimum chargeable weight. The trade-off is handling: cargo is unloaded and reloaded at each hub, so packing has to survive that.
ShipSeth's B2B freight bookings run on Delhivery B2B LTL rate cards.
LTL vs PTL vs FTL: which one fits your load →हिंदी में पढ़ें: थोक माल कैसे भेजें: पार्सल, LTL या पूरा ट्रक →PTL
Part TruckloadPTL freight takes a large share of a truck, but not all of it, and usually goes closer to direct than LTL.
Fewer hub transfers mean less handling and often a faster transit than LTL. PTL makes sense when a consignment is too big for LTL pricing to be efficient but nowhere near a full truck.
LTL vs PTL vs FTL: which one fits your load →हिंदी में पढ़ें: थोक माल कैसे भेजें: पार्सल, LTL या पूरा ट्रक →FTL
Full TruckloadFTL means you hire a whole truck for your cargo, and it goes from your dock to the consignee without stopping at hubs.
You pay for the truck, not the kilos, so FTL only works out when you can fill most of it. It is the fastest and lowest-handling way to move a large load.
LTL vs PTL vs FTL: which one fits your load →हिंदी में पढ़ें: थोक माल कैसे भेजें: पार्सल, LTL या पूरा ट्रक →CFT (6 CFT vs 8 CFT)
Cubic feetCFT is the number of kilograms a carrier charges for each cubic foot of cargo, and it sets the volumetric divisor on B2B freight.
Delhivery B2B LTL treats a cubic foot as 30 × 30 × 30 cm (27,000 cm³). At 6 CFT the divisor is 27,000 ÷ 6 = 4,500. At 8 CFT it is 3,375, which makes the same carton heavier on paper.
Dense cargo like metal parts rarely notices the difference. Light, bulky cargo does, so compare the final freight on both products, not just the per-kg rate.
6 CFT vs 8 CFT: which costs less for your cargo →हिंदी में पढ़ें: CFT क्या होता है →Consignor and consignee
Sender and receiver, shipper and receiverThe consignor hands goods to a carrier for transport, or has them handed over on its behalf; the consignee is the person named to receive them.
Both names are fixed on the LR or AWB. On a ShipSeth booking the consignor block prints from the pickup point you choose and the consignee block from Drop Details. The consignee is not always your buyer: when a buyer asks you to deliver to their customer or site, the buyer stays on the invoice and the receiver goes on the LR.
Consignor and consignee: whose name goes on the invoice, e-way bill and LR, with a check for bill-to-ship-to orders →हिंदी में पढ़ें: कंसाइनर और कंसाइनी क्या होता है →Delivery challan
DC, challan, job work challanA delivery challan is the GST document goods travel on when they move without a sale, or before the sale is final.
Rule 55 of the CGST Rules allows it for job work, stock moved between premises on one GSTIN, goods sent on approval, exhibitions, and each lot of a large order already invoiced. It carries the value of the goods, tax only where the movement is part of a sale, and is issued in three copies: for the consignee, the transporter and you.
A branch on a different GSTIN is not a challan case: that transfer needs a tax invoice. On a ShipSeth booking the challan number goes in Invoice Number, using only letters, digits, "/" and "-".
Source: Rule 55, CGST Rules (CBIC tax portal).
Delivery challan in GST: which movements need one, the Rule 55 fields, and a check for your next consignment →हिंदी में पढ़ें: डिलीवरी चालान क्या होता है →LR
Lorry ReceiptA lorry receipt is the carrier's document acknowledging it has received your goods for transport, and it works as the B2B shipping label and contract.
It names the consignor, consignee, number of packages, weight, declared value and invoice reference. ShipSeth generates the LR automatically when you book B2B freight, in three copies: Consignor Copy, Consignee Copy and POD · Carrier Copy (signed at delivery as proof).
Lorry receipt explained: copies and fields →हिंदी में पढ़ें: बिल्टी क्या होती है →Master AWB and child AWB
MPS, multi-piece shipment, box AWBA master AWB is the single tracking number for a consignment of several cartons, and each carton carries its own child (box) AWB under it.
Freight hubs scan every carton on its own, so one number for the whole lot is not enough. When you book B2B freight on ShipSeth, the LR number, the master AWB and one box AWB per carton come back together, and each carton label prints its own box AWB.
Quote the LR or the master AWB when you ask about the whole consignment. Quote the child AWB when one carton is the problem: if 30 cartons left a Faridabad godown and 29 reached Pune, the missing box's AWB tells the carrier which one to trace.
Multi-piece shipment (MPS): master and child AWBs, how several cartons are weighed, and a one-LR-or-separate-parcels calculator →हिंदी में पढ़ें: मल्टी-पीस शिपमेंट (MPS) क्या है →E-way bill
An e-way bill is the GST document required to move goods worth more than ₹50,000 in a single consignment.
It is generated on the government's e-way bill portal under Rule 138 of the CGST Rules and carries the invoice details plus the vehicle or transporter. The ₹50,000 is the consignment value on the invoice, tax included.
ShipSeth will not book a shipment whose invoice is above ₹50,000 without an e-way bill number, so the consignment is not held up on the road.
Source: GST Council, "E-way Bill" taxpayer flyer (Chapter 18), on Rule 138 of the CGST Rules, 2017.
E-way bill for courier shipments: when it is required →हिंदी में पढ़ें: ई-वे बिल क्या है →Is a returning parcel an RTO or a reverse pickup?
If the buyer never received it, it is an RTO; if the buyer received it and is sending it back, it is a reverse pickup. Sellers mix the two up on the phone with couriers all the time, and they are billed differently.
| RTO | Reverse pickup | |
|---|---|---|
| What triggers it? | Delivery fails: buyer unavailable, refused, wrong address, unanswered NDR | You book it after delivery, for a return or exchange |
| Which AWB? | The same AWB, status RTO Initiated, then RTO Delivered | A new AWB for a new shipment |
| Who starts it? | The courier, or you from the NDR screen | You, from Orders → Reverse Pickup |
| How is it priced? | On the rate card's RTO direction, on top of the forward freight | On the reverse direction, as its own booking |
| COD? | COD was never collected, so nothing is remitted | Seller-funded pickup, no COD |
Where do these terms show up on a ShipSeth bill?
Most of them appear as a line on the quote you see before booking. RTO and COD remittance appear later, once the shipment is returned or delivered.
| Term | Where you see it | Applies to |
|---|---|---|
| Chargeable weight | Quote and invoice | Every shipment |
| Zone and weight slab | Quote, inside the freight line | B2C parcels |
| Per-kg matrix rate | B2B quote, with the LR minimum | B2B freight |
| ODA | Quote, as a surcharge line | Only remote pincodes |
| Handling | B2B quote, as a surcharge line | Only LRs in a heavy-weight band |
| Green tax | B2B quote, as a surcharge line | B2B consignments with a Delhi pincode at either end |
| DPH / fuel surcharge | Quote, as surcharge lines | Rate cards that carry them |
| ROV | B2B quote | Every B2B booking (owner's or carrier's risk) |
| RTO | Return freight, priced on the rate card's RTO direction | Only returned shipments |
| Weight discrepancy | Reconciliation, after the courier reweighs | Only reweighed shipments |
| Reverse pickup | Its own booking and wallet debit | Returns you book |
| COD remittance | Remittance statement, Tuesday and Friday | COD orders that were delivered |
Which free tool works out each term for you?
The terms below have a calculator, checker or kit behind them, free and without a login. Read the definition here, then do the sum for your own carton, pincode or invoice. All of them sit together on the free tools page.
| Term | Tool | What it tells you |
|---|---|---|
| Volumetric weight | Volumetric weight calculator | The volumetric kilos of a box at each courier's divisor, mixed cartons included |
| Chargeable weight, weight slab | Chargeable weight calculator | Which slab a parcel bills in, and why 0.6 kg can bill as 1 kg |
| Zone, EDD | Shipping rate calculator | Courier options and delivery days for one pincode pair |
| Pincode serviceability, ODA | Bulk serviceability checker | Delivery, COD and ODA status for up to 2,000 pincodes |
| HSN code | HSN code finder | The code and the GST rate, with the ₹2,500 per-piece rule for clothes and shoes |
| Tax invoice | GST invoice generator | A PDF invoice with CGST + SGST or IGST and a valid invoice number |
| Shipping label | Label crop and sort | Marketplace label PDFs cut to 4x6 or A4 and sorted by SKU |
| Picklist, manifest | Picklist generator | Units per SKU for the packer and a hand-over sheet per courier |
| Picklist (shelf side) | SKU barcode label generator | Code 128 stickers for rack slots and polybags, carrying the same SKUs the picklist prints |
| Courier packaging | Box size calculator | Which carton on your shelf bills the lowest slab for an item, and the size worth ordering if none fits |
| Weight discrepancy | Weight dispute evidence kit | Whether to claim on weight or size, the photos that prove it, captioned with the AWB, and the remarks text |
| RTO | RTO loss calculator | What returned orders cost you in a month, COD and prepaid apart |
| E-way bill | E-way bill checker (in the guide) | Whether a consignment needs one, and how many days it stays valid |
| CFT | 6 CFT vs 8 CFT checker (in the guide) | Chargeable kilos on both products and the break-even rate |
Free to register · No monthly fee
See every charge before you book
ShipSeth shows the chargeable weight and each surcharge line for every courier option, then deducts from your prepaid wallet only when you book.