SKU Barcode Label Generator: Stickers That Scan, on a Roll or an A4 Sheet
Paste the SKU list from your stock sheet. The generator checks that every code fits the label you have and will scan, warns you about codes a packer could mix up, and gives you one PDF of Code 128 stickers ready for the thermal printer or a sheet of A4 labels.
Quick Answer
Use Code 128 for SKU stickers. It takes letters, digits and hyphens, so the SKU prints exactly as written. On a 50 × 25 mm thermal label at 203 dpi, keep the SKU to about 12 letters or 24 digits so the thinnest bar stays at 0.25 mm. Print the PDF at actual size and scan one test sticker first.
Make your SKU stickers
1. Your SKUs
Copy three columns straight from Excel or Google Sheets and paste. The name and the count are optional; with no count you get one sticker per SKU. A first row headed "SKU" is skipped.
2. Label and printer
7 of 8 SKUs will print: 31 stickers on 31 roll labels. 1 won't, and stays out of the PDF until you fix it. 2 more print but have warnings worth reading first.
| SKU | Result | Stickers | Bar width | Notes |
|---|---|---|---|---|
| JK104-RS-S | Prints | 4 | 0.250 mm | – |
| JK104-RS-M | Prints | 6 | 0.250 mm | – |
| JK104-RS-L | Prints | 6 | 0.250 mm | – |
| JK104-RS-XL | Prints | 4 | 0.250 mm | – |
| JK104-ROSE-XXL | Too long | 2 | – | Too long for a 50 mm label: bars would be 55.3 mm wide at the narrowest bar that still scans. Cut it to about 12 characters (more if they are digits) or use a wider label. |
| JK207-IND-M | Prints | 5 | 0.250 mm | – |
| JK2O7-IND-L | Prints | 5 | 0.250 mm | Looks like jk207-ind-l to a packer. O and 0, I and 1, and upper and lower case read as different SKUs to the scanner. |
| jk207-ind-l | Prints | 1 | 0.250 mm | Looks like JK2O7-IND-L to a packer. O and 0, I and 1, and upper and lower case read as different SKUs to the scanner. |
Bar width is the thinnest bar on the sticker, rounded to whole printer dots. The generator never goes below 0.25 mm, and gives a short SKU wider bars, up to 0.5 mm, because wider bars scan from further away and survive a worn print head. Roll formats make one label per PDF page; A4 formats fill the sheet left to right, starting from the label number you set, so a half-used sheet isn't wasted. Nothing you paste leaves this browser tab.
What is a SKU barcode, and is it the same as an EAN?
A SKU barcode is your own stock code turned into bars, and it is not an EAN. You decide what the code says, print as many as you like, and nobody outside your business needs to recognise it. Its only job is to let a packer or a scanner tell one item from the next without reading the label.
An EAN or GTIN on a retail pack is a different thing: a registered product number that a shop's billing system looks up. This generator makes SKU stickers, not EANs. If a retail chain or distributor asks for an EAN on your packs, ask them which registered number they expect before you print anything; a sticker from this page won't stand in for it.
Why use Code 128 for SKU stickers?
Because it takes a SKU exactly as you already write it. Code 128 holds capital and small letters, digits and the symbols on a keyboard, so JK104-RS-XL goes in with its hyphens. Every handheld and USB scanner sold for warehouses reads it out of the box.
It is also compact where it counts. A run of four or more digits switches to a mode that packs two digits into each bar pattern, so the numeric code 10024517 needs only 7 bar patterns including start, check and stop, against 14 for the 11-character kurta code. The last pattern before the stop is a check character worked out from all the others, which is why a scanner rejects a smudged sticker instead of typing a wrong SKU.
ShipSeth's own shipping labels print the AWB in Code 128 as well. A desk that already scans AWBs at hand-over can scan SKU stickers with the same gun.
How long can a SKU be and still scan?
On a 50 × 25 mm thermal label at 203 dpi, about 12 letters or 24 digits. The limit comes from the bars, not the label height. Every character costs 11 bar widths, the start, check and stop add 35 more, and the scanner needs 10 bar widths of blank white on each side. Keep the thinnest bar at 0.25 mm, which is two dots on a 203 dpi head, and divide that into the width you have.
| Label | Letters, 203 dpi | Digits only, 203 dpi | Letters, 300 dpi |
|---|---|---|---|
| 38 × 25 mm roll | 7 | 14 | 7 |
| 38.1 × 21.2 mm (A4, 65 per sheet) | 7 | 14 | 7 |
| 50 × 25 mm roll | 12 | 24 | 11 |
| 63.5 × 33.9 mm (A4, 24 per sheet) | 16 | 32 | 16 |
| 100 × 50 mm roll | 30 | 60 | 29 |
These are ceilings with 1.5 mm left clear at each edge of the label, not targets. A 300 dpi printer can't fit more letters on the same label, because the narrowest safe bar rounds up to three of its smaller dots. What it gives you is cleaner edges on those bars. Letters mixed with short digit groups count as letters; only runs of four or more digits get the two-for-one packing.
If your SKUs run long, there is an easier fix than a bigger roll: drop the brand prefix that is the same on every sticker. JAIPURKURTI-ROSE-XL and JK104-RS-XL tell a packer the same thing, and only the second one fits a 50 mm label.
How should you write SKUs so packers don't mix them up?
Write them so they can't be misread by a tired person at 9 pm, because that is when most wrong-size parcels go out. The scanner never confuses two codes; the person choosing which shelf to reach into does. The generator flags the patterns below in your own list.
- One fixed order: style, then colour, then size, every time.
JK104-RS-XL, neverXL-JK104-RSon the next design. - No letter O next to digits.
JK2O7andJK207are two different SKUs to a scanner and the same SKU to an eye. The same goes for I and 1. - One case only. Capitals throughout.
jk207-ind-landJK207-IND-Lscan as different codes, and spreadsheet lookups don't always treat them alike. - No spaces. A space scans fine but disappears when someone pastes the SKU into a seller panel or trims an Excel column, and then the codes stop matching.
- The same SKU everywhere. Use the code you list on Meesho, Flipkart or your own site. The Label Crop & Sort tool sorts the day's labels by the SKU printed on them and the Picklist Generator totals units by SKU, so if the shelf sticker says something else, the packer is translating in their head.
SKU अभी बने ही नहीं हैं, और रंग हिंदी में लिखे हैं? SKU कोड कैसे बनाएं पर पर्ची हर डिज़ाइन, रंग और साइज़ का SKU बनाकर इसी टूल में पेस्ट करने वाली शीट दे देती है।
What does this look like for a real catalogue?
Example: a Jaipur block-print kurta seller with two designs in five sizes, printing on a 50 × 25 mm roll with a 203 dpi thermal printer.
JK104-RS-XL is 11 characters with no four-digit run, so it is 14 bar patterns including start, check and stop: 176 bar widths with the white margins. The label has 47 mm between its edge margins, which allows 0.267 mm a bar. That rounds down to two printer dots, 0.25 mm, so the barcode is 44 mm wide and prints.
JK104-ROSE-XXL is 14 characters: 209 bar widths, or 52.25 mm at 0.25 mm, which does not fit in 47 mm. Writing the colour as RS, like the other sizes, brings it to 12 characters and it fits.
Two more catches in the same list: JK2O7-IND-L has a letter O where JK207 has a zero, and jk207-ind-l is in small letters. Both scan, and both send the wrong kurta out sooner or later.
Example: a Rajkot steelware unit using 8-digit stock numbers such as 10024517.
Eight digits pack into four bar patterns, so the whole code is 99 bar widths. On the same 47 mm the bars could be 0.47 mm; the generator rounds down to whole dots and prints them at 0.375 mm, three dots, which reads easily even through a plastic pouch.
How do you print the stickers on a thermal printer?
Set the printer driver to the roll you loaded, then print the PDF at actual size. Almost every barcode that "prints but won't scan" comes from skipping one of those two steps.
Match the paper size in the driver
In the printer's preferences, set the label to the same size as the roll, 50 × 25 mm or 38 × 25 mm, and the gap or black-mark sensing to whatever your roll uses. If the driver still thinks it has a 4 × 6 inch shipping-label roll loaded, each sticker lands half on one label and half on the next.
Print at 100%, not "fit to page"
The PDF page is already the size of one label. Scaling it even a few percent squeezes the bars below the width the generator worked out.
Raise the darkness if bars look grey
Thin bars on a light setting break into dots. Push darkness up a step or two and slow the print speed before you blame the barcode.
Scan one, then print the roll
Scan the first sticker with your warehouse scanner or a phone camera app and check the text it shows letter for letter. Then print the rest.
On A4 sticker sheets, print one page on plain paper first and hold it against a sheet of labels up to the light. If every barcode sits the same distance off its label, set that distance in "Shift right" or "Shift down" and print again. Printers drift a millimetre or two, and the shift fixes all 65 labels at once.
Where do SKU stickers fit in a shipping day?
On the shelf and on the polybag, before the shipping label ever prints. The order of a typical evening at a small desk runs like this:
- Download the day's marketplace labels and run them through Label Crop & Sort, sorted by SKU.
- Make the picklist from the same files with the Picklist Generator. It totals units by SKU, size and colour.
- Pick from shelves marked with the stickers from this page. The packer matches the SKU on the picklist line to the SKU on the shelf sticker, not to a product photo.
- Pack, then weigh and measure the sealed parcel. For your own orders, book on ShipSeth with the packed weight and size, compare every courier's price on screen, and print the shipping label with its AWB barcode.
- At pickup, the AWBs on the manifest are scanned at hand-over. Same scanner, different barcode.
Stick the SKU barcode on the item's own bag or tag, not on the outer courier carton. The carton gets the shipping label, and two barcodes on one face of a box are how a hub scanner picks up the wrong one.
Picked, packed, now ship it
Compare Every Courier Before You Book
Free to register, no monthly fee, prepaid wallet. Enter the packed weight and size and every courier's price shows before you book, with the AWB label ready to print.
Frequently Asked Questions
How do I make barcode stickers for my SKUs for free?
Which barcode type should I use for SKU labels?
Is a SKU barcode the same as an EAN barcode?
How long can a SKU be on a 50 × 25 mm label?
Why does my thermal printer print the barcode but the scanner won't read it?
Can I print Hindi product names on the sticker?
Are my SKUs uploaded anywhere?
Where these facts come from
- The barcode tables, the width rules and every number in the length table are worked out by this page's own code. Before publishing, 3,000 generated SKUs were encoded and decoded back to text with an independent Code 128 table, and every one matched.
- ShipSeth shipping labels print the AWB as a Code 128 barcode (ShipSeth label module).
- Label Crop & Sort and the Picklist Generator read the SKU printed on marketplace labels; see those tool pages.
- The A4 sheet layouts are the common 65-up and 24-up label sheet sizes. Packets differ by a fraction of a millimetre, so check the label size printed on yours and use the shift fields.