Declared Value in Courier: What to Enter, and the Four Things It Decides
It is one number on the booking form, and most sellers type whatever comes to mind: the COD amount, a round figure, whatever the last order was. That number later decides what a lost parcel pays, what B2B risk cover costs and whether the goods needed an e-way bill. It should be the invoice, every time.
Quick Answer
Declared value is what you tell the courier your goods are worth at booking. Enter the invoice total for the goods, tax included, after discount. It sets the most a loss claim can pay (on ShipSeth, the lower of this value and ₹5,000 unless insured), the ROV charge on B2B freight, and whether an e-way bill is needed above ₹50,000.
What is declared value in courier?
It is the value of the goods you put on record when you book, and on ShipSeth it is the field called Invoice Value in step 1 of the booking form. Other platforms call it shipment value or declared value; it is the same thing.
The courier never opens the box to check it. What it does is hold you to it later. When a parcel goes missing at a hub in Bhiwandi, or a B2B consignment is stopped on the highway near Kota, the declared value is the first number anyone looks at, and the invoice is the second. If the two don't agree, the conversation is already going badly.
That is why ShipSeth's form refuses ₹0. The error under the field spells it out: couriers settle lost and damage claims against this value, so a ₹0 value means a ₹0 claim.
What value should I enter: the invoice, the COD amount or the cost price?
The invoice total for the goods, with GST included and any discount taken off. Not the cost price, not a round number, and not the COD amount unless the two happen to be the same.
The cost-price idea comes up a lot with resellers: "I paid ₹600 for it, so it's worth ₹600." To you, maybe. But the claim is proved with the invoice you raised to the buyer, and that invoice says ₹1,299. Declare ₹600 and ₹600 is the most you can recover for something you had already sold for ₹1,299.
Here is where each number goes in the booking form, and what reads it afterwards:
| Field | What to put in it | What it drives |
|---|---|---|
| Invoice Value (Step 1) | The goods value on your invoice, tax included, after discount | Claim ceiling, ROV on B2B, e-way bill check, the line items on the invoice |
| COD Amount (Step 1, COD only) | Cash the rider collects at the door | The COD charge and your remittance |
| Invoice amount (Step 2) | Filled from Invoice Value; change it only if the invoice says otherwise | The ₹50,000 e-way bill prompt |
| Declared Value (₹) column (bulk sheet) | Same as Invoice Value, one per row | Optional in the sheet. A blank cell goes in as ₹0 |
The bulk sheet catches people out. In a bulk upload the Declared Value (₹) column is optional, so the upload goes through with it empty, and every empty cell is read as ₹0. Fill the column before you upload, even if it means pasting the order totals from your Shopify or marketplace export, and keep it as plain numbers: a cell formatted with ₹ or thousands commas is read as text, and text is read as ₹0 too. The Hindi guide (डिक्लेयर्ड वैल्यू क्या होती है) has a check that reads a pasted sheet line by line the way the upload does.
Why is declared value different from the COD amount?
Because one is what the goods are worth and the other is what is still owed. They match on a plain COD order and split apart the moment the buyer pays anything up front.
Take an example. A boutique in Chandni Chowk sells a lehenga for ₹4,500 and asks for ₹500 on UPI before dispatch, which a lot of sellers do to cut down COD refusals. The rider should collect ₹4,000. So the COD Amount is ₹4,000. The Invoice Value is still ₹4,500, because the lehenga hasn't become cheaper. If it is lost and the seller had typed ₹4,000 in both fields, the claim tops out at ₹4,000 and the ₹500 advance, which has to go back to the buyer, comes out of the seller's pocket.
The opposite mismatch is the one to stop. A COD amount higher than the declared value means the rider is collecting more cash than the parcel is said to be worth. The only honest reason for that is a delivery or COD charge printed on the same invoice. Otherwise it is a typo, and the buyer at the door will notice it before you do.
The two numbers also feed different charges. On ShipSeth's rate engine the COD charge is worked on the COD amount (a percentage with a minimum, whichever is higher), while value-based charges use the declared value. More on how COD charges work and when the money comes back in the COD remittance guide: twice a week, every Tuesday and Friday.
What numbers should I type for my order?
Put in what is on the invoice and how the buyer is paying. The check gives the Invoice Value and COD Amount to enter, tells you whether step 2 will ask for an e-way bill, and shows the most a loss claim can pay. Change the "value you'd type" box to see what a lower or higher figure would cost you.
Invoice Value to enter
₹4,500
Same as what you planned
COD Amount
₹4,500
What the rider collects
Most a loss claim pays
₹4,500
Within the ₹5,000 ceiling
Declared value matches the invoice. That is the only number that holds up at a claims desk and at a check-post.
Step 1 · Payment Mode: COD Step 1 · Invoice Value: ₹4,500 Step 1 · COD Amount: ₹4,500 Step 2 · E-way bill number: not needed for this value
The examples are made up to show how the check reads; they are not real ShipSeth orders. The ₹5,000 ceiling is from ShipSeth's terms (§7.2) and applies unless the shipment was insured. The ROV percentage and minimum are example figures; your B2B card's own ROV line is shown on the quote before you book.
How much does a courier pay if a parcel is lost?
On ShipSeth, at most the lower of the declared invoice value and ₹5,000 per shipment, unless the shipment was insured. The declared value is a ceiling, not a promise: you still have to show the invoice, and the claim pays what is proven up to that ceiling.
Run the numbers for the three B2C examples in the check. The ₹1,299 kurti can recover up to ₹1,299. The lehenga can recover up to ₹4,500 if declared correctly, or only ₹4,000 if the COD figure was copied into the value box. The ₹12,000 mixer grinder can recover ₹5,000, and the other ₹7,000 is the seller's loss whatever was declared.
That last case is the one to plan for. If you regularly ship single items above ₹5,000 (phones, small appliances, silver from Jaipur's Johari Bazaar), the ceiling decides how much risk sits with you. Packing is where most of that risk is actually controlled: the damaged parcel guide covers the 7-day window and the evidence a claim needs, and the packing guide covers the box itself.
Does declared value change the courier rate?
For most B2C parcels, no. Freight comes from the chargeable weight and the zone, and the COD charge from the COD amount. Unless a card carries a value-based line, a ₹500 kurti and a ₹5,000 kurti in the same poly mailer to the same pincode get the same quote, and any such line shows up in the quote breakdown before you book.
B2B freight is different. If you switch the booking from Owner Risk to Carrier Risk (the switch sits in the Options block, next to Self Drop), the card adds a risk-on-value line worked as a percentage of declared value, lifted to a minimum. With an example rate of 0.2% and a ₹100 minimum, a ₹1,85,000 consignment pays ₹370. The owner's risk vs carrier's risk guide works out when that is worth paying.
One more thing the form does: rates are quoted on the value you entered. Change the Invoice Value after the courier options are on screen and you have to refresh rates before booking, so the quote and the booking carry the same figure.
Is it a problem to declare a lower value than the invoice?
Yes, and it rarely saves anything. On a B2C parcel the freight usually doesn't change, so the main effect is a lower claim ceiling. It can be worse than that: ShipSeth's merchant agreement (§13.4) says no claim lies at all for goods that were misdeclared or under-declared. On B2B the saving is a few hundred rupees of ROV, and the cost can be the whole consignment.
The utensils example in the check shows why. Forty cartons of steel utensils from Jagadhri to a wholesaler in Lucknow, invoiced at ₹1,85,000. The seller types ₹45,000 to keep the ROV down. On the example card the ROV falls from ₹370 to the ₹100 minimum, a saving of ₹270. In return:
- The carrier's-risk cover is now ₹45,000 on goods worth ₹1,85,000, and an under-declared consignment can be refused a claim outright.
- The form no longer asks for an e-way bill, but the goods still need one. The rule counts the consignment value on the invoice, tax included (GST Council e-way bill flyer, Chapter 18), and the invoice travels with the cartons.
- The lorry receipt, the invoice and the booking now disagree, which is exactly what an officer at a check-post or a claims desk looks for.
Don't do it. If ROV on a large consignment feels expensive, the answer is to compare cards or stay on owner's risk with your own goods-in-transit cover, not to write a smaller number.
Is it worth declaring a higher value to be safe?
No. A higher figure doesn't create cover the invoice can't back up. The claim is proved with the invoice, so a ₹3,000 saree declared at ₹10,000 still recovers at most ₹3,000.
On B2B at carrier's risk it also costs you, because the ROV line grows with the declared value. And if the inflated figure crosses ₹50,000, step 2 will ask for an e-way bill number the real invoice never needed. Declare the invoice. If the goods are worth more than the invoice shows, the invoice is what needs fixing.
The invoice value in, the rate before you book
Book with the Right Numbers
Free to register, no monthly fee. Enter the invoice value, the box and the pincodes, and every courier's rate is shown before you book. You pay per shipment from a prepaid wallet.