← Shipping GuideFree Tool

Chargeable Weight Calculator: Why 0.6 kg Bills as 1 kg

Courier invoices rarely show the weight you packed. They show a slab. Put in your parcel's weight and size, pick a slab structure, and see the exact weight you will be billed at, how many steps that is, and how close you are to the next line.

⚖️
ShipSeth Research Desk
Delhi, India · Updated 26 October 2026

Quick Answer

Chargeable weight is the higher of a parcel's actual weight and its volumetric weight (L × B × H in cm ÷ 5,000 on ShipSeth's B2C cards). The rate card then rounds it up to the top of its slab. On a card with a 500 g base and 500 g steps, a 0.6 kg parcel bills as 1 kg.

Find your billed slab weight

1.176 kg
Volumetric (÷ 5,000)
1.176 kg
Chargeable weight
1.5 kg
Billed slab weight

Base 500 g + 2 × 500 g. You are paying for 324 g you did not use. Volume decides this bill: a box 5.1 cm deep (same length and breadth) drops it to 1 kg.

Same parcel onBilled weightUnused weight
250 g base, then 250 g, then +500 g1.5 kg324 g
500 g base, then +500 g steps1.5 kg324 g
1 kg base, then +1 kg steps2 kg824 g
2 kg base, then +1 kg steps2 kg824 g
5 kg base, then +1 kg steps5 kg3,824 g
10 kg base, then +1 kg steps10 kg8,824 g

Slab structures are the base and step sizes configured on ShipSeth's B2C rate cards. Which card is cheaper depends on its rate for your zone: the rate calculator shows every courier's price after a free signup.

What is chargeable weight in courier?

Chargeable weight is the figure the courier prices your parcel on, and it is almost never the number on your scale. Two things push it up. First, volume: a big, light box is billed as if it were heavier, using L × B × H ÷ 5,000 (the volumetric weight calculator covers that part in depth). Second, slabs. The rate card doesn't charge per gram. It charges per step, and any part of a step counts as the whole step.

Most guides stop at the first part. The second part is where small sellers quietly lose money, because it hits every parcel, dense or not.

Why does a 0.6 kg parcel bill as 1 kg?

Because 0.6 kg crosses the 500 g line and starts a second half-kilo step. On the most common B2C card, the first 500 g is the base slab, and every started 500 g above it is one more step. Here is how the weights fall:

Chargeable weightBilled asWhat you pay for
Up to 0.50 kg0.5 kgBase only
0.51 to 1.00 kg1.0 kgBase + 1 step
1.01 to 1.50 kg1.5 kgBase + 2 steps
1.51 to 2.00 kg2.0 kgBase + 3 steps
2.01 to 2.50 kg2.5 kgBase + 4 steps
4.51 to 5.00 kg5.0 kgBase + 9 steps

Read the table the other way round and the cost is obvious. A 510 g parcel pays for 1 kg. So does a 990 g one. The seller shipping 510 g parcels is paying for 490 g of nothing on every single order.

How do weight slabs work on a courier rate card?

Every slab card has a base slab charged in full, then steps charged per started step. That is the whole rule. On ShipSeth the calculation runs in this order, the same order our rate engine uses when it prices a booking:

01

Chargeable weight in grams

Scale weight against box volume, compared to the gram, and the bigger number goes forward. A card can also be set to bill on actual weight only or on volume only, but by default the bigger one wins.

02

The base slab, always in full

A 300 g parcel on a 2 kg base card pays the 2 kg base. Being under the base never earns a discount.

03

Steps above the base, rounded up

Weight above the base is divided by the step size (500 g or 1 kg) and rounded up. 1.2 kg on a 500 g card is 700 g over, which is two steps.

04

Surcharges and GST on top

COD, ODA, fuel and other surcharges are separate lines added after base freight, then GST. They never change the slab.

The base and step sizes differ by courier product. ShipSeth's B2C cards come in six shapes: 250 g, 500 g, 1 kg, 2 kg, 5 kg and 10 kg bases, with 500 g or 1 kg steps. The 250 g card has one extra wrinkle: a separate 251 to 500 g slab before the half-kilo steps begin. B2B freight works differently again; it is priced per kg by region, which the per-kg matrix pricing guide explains.

Which slab structure suits your parcels?

Match the base to your typical parcel, not to your heaviest one. A 2 kg base card is a bad deal for a 400 g kurti and a fine one for a 1.9 kg pair of shoes. The 1 kg card looks tidy until a parcel weighs 1.05 kg and gets billed as 2 kg.

A rough rule we'd give any seller: if most parcels sit just above a half-kilo line (0.55, 1.05, 1.6 kg), a 500 g step card wastes the least. If they sit just under a whole kilo, a 1 kg card costs nothing extra. Above 5 kg, look at the heavier base cards and compare final freight, because three different cards can give the same billed weight at very different prices.

What does this look like on real parcels?

Three worked examples. The weights and boxes are illustrative, the arithmetic is exactly what the rate engine does.

Example 1: a 0.6 kg pack of phone covers from Karol Bagh

20 × 15 × 5 cm mailer, 0.6 kg on the scale, 500 g base card

Volumetric: 1,500 ÷ 5,000 = 0.3 kg → chargeable 0.6 kg → 100 g over the base starts a step → billed 1.0 kg

Volume plays no part here. The extra 400 g on the invoice is pure slab rounding. On a 250 g card it also bills as 1.0 kg, so for this parcel only the rate on each card decides.

Example 2: a saree box from Surat

35 × 28 × 6 cm, 0.9 kg actual, 500 g base card

Volumetric: 5,880 ÷ 5,000 = 1.176 kg → chargeable 1.176 kg → 676 g over the base = 2 steps → billed 1.5 kg

The box is 176 g of air over a slab line. A 5 cm deep box gives 4,900 ÷ 5,000 = 0.98 kg, and the parcel drops to 1.0 kg billed: one whole step saved on every order.

Example 3: a 4.2 kg carton of steel tiffins from Rajkot

30 × 25 × 20 cm, 4.2 kg actual

Volumetric: 15,000 ÷ 5,000 = 3.0 kg → chargeable 4.2 kg → 1 kg card: 1 + 4 steps = 5 kg · 2 kg card: 2 + 3 steps = 5 kg · 5 kg card: base only = 5 kg

Same billed weight on three different cards. What differs is the rate each card carries for your zone, so pick by final freight, not by slab size. The rate calculator lays them side by side.

How do you drop a parcel into a lower slab?

Find out which number is deciding the bill, then work on that one. The calculator tells you: if volume wins, it gives the box depth that takes you under the line; if actual weight wins, it tells you how many grams have to go.

  1. Volume wins? Cut the box, not the product. Stock cartons are usually the problem. A mailer pressed flat or a carton one size down often clears a whole step.
  2. Actual weight wins, and you're within 100 g of a line? Look at the packing. Double-wall cartons, bubble wrap layers and printed inserts all add grams. Swap a 120 g carton for a 60 g poly mailer and a parcel that was 40 g over the line is back under it.
  3. Neither can move? Then change the card, not the box. Run the parcel through the comparison table above and pick the structure with the least unused weight, then check its price.

Don't under-declare to get there. The courier weighs and measures at the hub, and a declared weight below the real one becomes a weight dispute and an extra charge on top.

What happens if the courier reweighs your parcel?

You pay the difference if the hub weight lands in a higher slab, and you can contest it. On ShipSeth the corrected charge appears against the shipment on the Weight Reconciliation screen. Open it, choose Raise Dispute Claim, pick the reason (weight correct, dimensions correct, package tampered, duplicate charge), enter the weight you shipped at and upload up to five photos. The photo that wins disputes is the packed parcel on a weighing scale with the reading visible, plus one with a tape across each side.

Take those photos at packing time. Trying to recreate them after the charge arrives, with the parcel already in Guwahati, does not work. Each courier sets its own dispute window, counted from the day the charge is posted, so check the days left on the screen first. If the charge has already landed, the Weight Dispute Evidence Kit tells you whether to claim on weight or on size and captions your photos with the AWB.

See the billed weight before you book

Compare Every Courier's Slab and Price

Free to register, no monthly fee, prepaid wallet. The rate calculator shows chargeable weight, freight and every surcharge for each courier on your lane.

Frequently Asked Questions

What is chargeable weight in courier?
Chargeable weight is the weight the courier bills: the higher of the parcel's actual weight on a scale and its volumetric weight (L × B × H in cm ÷ 5,000 on ShipSeth's B2C parcel cards). The rate card then rounds that figure up to the top of the slab it falls in.
Why is my 0.6 kg parcel charged as 1 kg?
Because the rate card bills in steps. On a card with a 500 g base and 500 g additional steps, 0.6 kg is 100 g over the base, which starts a second step. Two half-kilos are billed, so the invoice weight is 1 kg.
Is 1.01 kg billed as 1.5 kg or 2 kg?
It depends on the step size. On a 500 g step card it bills as 1.5 kg. On a card with a 1 kg base and 1 kg steps it bills as 2 kg. That 10 g overshoot costs one full step either way.
Does a parcel under the base weight pay less?
No. The base slab is charged in full however light the parcel is. A 300 g parcel on a 2 kg base card pays the same freight as a 2 kg parcel on that card, which is why the right card depends on your typical parcel weight.
Do surcharges and GST change the chargeable weight?
No. Chargeable weight only sets the base freight. COD, ODA and fuel surcharges and GST are added after, as separate lines. ShipSeth shows each line next to every courier option before you book.
What if the courier weighs my parcel heavier than I declared?
If the courier's hub weight lands in a higher slab, the difference is charged to your wallet. You can contest it through ShipSeth's weight-dispute process with photos of the packed parcel on a weighing scale and its measurements.