← Shipping GuideB2B Logistics

Per-kg Matrix Pricing: Why B2B Freight Is Priced by Region, Not Slab

Parcel rate cards charge you in half-kilo steps by distance zone. LTL freight cards don't. They hold a grid of state-based regions with one rupee-per-kg rate per cell, plus two minimums that decide small consignments. Here is how to read one, and when it beats a parcel rate.

📦
ShipSeth Research Desk
Delhi, India · Updated 26 October 2026

Quick Answer

Per-kg matrix pricing is a freight rate card laid out as a grid of origin and destination regions, one rupee-per-kg rate in each cell. Freight equals chargeable kilos, rounded up and never under 20 kg on ShipSeth's B2B cards, times that rate. A minimum freight per LR then covers small consignments. The state decides the region, not the distance.

Slab card or per-kg matrix: which bills less?

Every rupee figure here is an example to show the arithmetic, not a ShipSeth or courier rate. Put in the numbers from your own two quotes.

₹3,155
Slab card freight
₹550
Matrix: freight + floor + processing
6 kg
Matrix is cheaper from

Matrix lines at 45 kg: 45 chargeable kg × ₹10 = ₹450 freight, plus ₹100 processing. That is ₹12 per actual kg before fuel, other surcharges and GST.

The LR minimum decides the freight line on every consignment up to 30 kg at this rate. Below that, adding cartons to the same LR costs you nothing extra in freight.

The slab side follows how parcel cards in ShipSeth's rate engine count weight: one price for the first 500 g, then one step for each further 500 g or part of it. The matrix side follows the B2B cards: weight rounded up to the next whole kg, lifted to the minimum, multiplied by the cell rate, then the LR floor is checked against freight plus processing. Enter the consignment's chargeable weight; for cartons that are light for their size, work that out first with the volumetric weight calculator.

What is per-kg matrix pricing?

It is a rate card shaped like a railway fare chart: regions down the side for where the goods start, the same regions across the top for where they end, and a rupee-per-kg rate in every box.

On ShipSeth's Delhivery B2B LTL cards the grid is 9 × 9, so 81 cells. To price a consignment the engine finds one cell, multiplies, and stops thinking about geography. There are no distance bands, no metro flag, no special treatment for a big city inside a region. Bhiwadi to Pune and Noida to Kolhapur land in the same N1 → W2 cell and pay the same per kg.

Freight = chargeable kg × rate in (origin region, destination region)

Everything else on the quote, the fuel line, risk on value, the pickup charge, is worked out from that freight figure or from the weight, and added on top.

Why isn't B2B freight priced in 500 g slabs like parcels?

Because the slab steps that matter on a 2 kg parcel are rounding errors on a 300 kg consignment.

A parcel card is built for the first kilo. Most of a courier's cost on a small box is fixed: picking it up, scanning it at each hub, a delivery boy's attempt at the door. So the first 500 g carries a heavy price and each extra half-kilo is cheaper. That shape is right for a kurta going from Jaipur to Pune.

LTL works the other way. Your cartons share a truck with other shippers' cargo, and what fills the truck is kilos and cubic feet. The fixed cost of handling one LR is still real, but it is a small part of a big bill, so the card moves it out of the per-kg rate and into three separate places: a 20 kg minimum weight, a minimum freight per LR, and a flat processing line per LR. What is left is a clean rate per kilo.

LineSlab card (parcel)Per-kg matrix (B2B LTL)
Used forParcels: B2C and small B2B boxesB2B LTL freight: cartons, bags, pallets
What sets the price bandA zone from distance and metro status: Within City, Regional, Metro and Non-Metro distance bands, Special Region, Remote CitiesThe state of the pickup pincode and the state of the delivery pincode, each mapped to one of 9 regions
How weight is countedA price for the first 500 g, then a price for each further 500 g or part of itChargeable kg, rounded up to the next whole kg, times one rate
Minimum weightThe first slab20 kg per consignment
Minimum billThe first-slab priceA minimum freight per LR, checked against freight plus the per-LR processing line
Typical extra linesCOD fee and the card's other surcharge linesProcessing per LR, fuel %, risk on value, first-mile pickup, ODA, handling, green tax for Delhi/NCR

Which cell of the grid is my lane?

W1 → N1
Your cell on the 6 CFT grid
12
State pairs priced on this cell

Any pickup in Gujarat, Daman & Diu, Dadra & Nagar Haveli to any delivery in Delhi, Uttar Pradesh, Haryana, Rajasthan prices on this one rate. The return lane, N1 → W1, is a different cell and can carry a different rate.

Regions are the nine broad zones on ShipSeth's Delhivery B2B 6 CFT card, matched by state. The 8 CFT card adds rows for Himachal Pradesh, Jammu & Kashmir, the North East states and the cities of Guwahati, Baddi and Jammu.

How is the region picked for a pincode?

By the state the pincode sits in, and nothing else.

When you enter pickup and delivery pincodes on a B2B shipment, ShipSeth looks up each pincode's state and walks the courier's region list until it finds the region that contains it. The pair is saved, so the next quote on the same two pincodes skips the lookup. If either pincode's state isn't on any region, the lane shows as not serviceable instead of guessing a rate.

This has one consequence traders notice quickly. A Ludhiana hosiery unit shipping to Shimla and to Dehradun pays the same 6 CFT rate for both, because Punjab, Himachal Pradesh and Uttarakhand are all N2. The hill road to Shimla doesn't change the cell. The ODA charge for a remote delivery pincode is a separate line, so it can still change the total.

Is the rate the same in both directions?

No. Each direction is its own cell, and the grid is not a mirror.

On ShipSeth's 6 CFT card the rate from N1 to E differs from E to N1, and N1 to W1 differs from W1 to N1. That follows how freight actually moves: trucks leave some regions full and come back half empty, and carriers price the empty leg to fill it. A Surat saree trader sending to Delhi and a Delhi wholesaler sending back to Surat are on two different cells and should compare two different quotes. Return shipments are keyed on their own direction in the card too, so never assume a return costs what the outbound did.

Where do the minimums bite?

On small consignments: a matrix card has a weight floor and a money floor, and below a certain weight the money floor sets your bill.

The weight floor is simple. Chargeable weight never goes under 20 kg on ShipSeth's B2B cards, so a 12 kg carton bills as 20.

The money floor is the minimum freight per LR, and it has a detail most rate sheets don't explain. The engine adds the flat processing line to freight and compares that sum with the minimum. If the sum is short, the freight line is raised by the gap. So with an example ₹400 minimum, ₹100 processing and ₹10 per kg, freight is effectively fixed at ₹300 for anything up to 30 kg. A 22 kg LR and a 30 kg LR cost the same.

Take a clear position on this: if you ship small B2B lots to the same buyer, don't send three LRs in a week. Hold them and send one. Each LR pays its own processing line and has its own minimum, and one 45 kg LR sits well above both floors where three 15 kg LRs pay three minimums. The Hindi version of this guide, पर-किलो रेट क्या है, has a tool that prices a week's small lots as separate LRs and as one.

How is a matrix quote built, line by line?

Five steps, in this order; the quote on ShipSeth shows each resulting line before you book.

01

Find the cell

The pickup pincode's state gives the row, the delivery pincode's state gives the column, and the direction (forward or return) picks the grid.

02

Count the kilos

Add up actual weight and volume for every carton, take the higher of actual and volumetric, round up once to the next kg, and lift it to 20 kg if it is lighter.

03

Multiply

Chargeable kg × the rupee-per-kg rate in the cell. That is the freight line.

04

Apply the LR floor

Add the per-LR processing line to freight. If the sum is under the card's minimum freight, the freight line is raised by the gap.

05

Add the surcharge lines, then GST

Fuel, risk on value, first-mile pickup, ODA and the rest are worked out, added, and 18% GST goes on the subtotal.

The order matters for one reason: the fuel percentage and other freight-based lines are calculated on freight as priced, so read your quote's freight row first, then the surcharge rows under it. The B2B freight surcharges guide explains each surcharge line, with a checker for which ones your consignment carries.

What does a worked example look like?

An illustrative consignment with example rates, so you can follow the arithmetic. These are not quotes.

Example: brass hardware, Jamnagar to Kanpur

6 cartons of door handles and hinges, 7.5 kg each, 40 × 30 × 25 cm. Jamnagar is in Gujarat (W1), Kanpur in Uttar Pradesh (N1). Example card: ₹10 per kg, 20 kg minimum, ₹400 minimum freight per LR, ₹100 processing. Example parcel card: ₹40 for the first 500 g, ₹35 per extra 500 g.

Actual 45 kg · volume 1,80,000 cm³ ÷ 4,500 = 40 kg · chargeable 45 kg · freight 45 × ₹10 = ₹450 · processing ₹100 · ₹550 is above the ₹400 floor, no top-up · parcel slab for 45 kg = ₹40 + 89 × ₹35 = ₹3,155

Brass is dense, so actual weight wins and the matrix bills exactly 45 kg. On these example numbers the parcel card costs nearly six times as much before surcharges. That gap is why B2B goods above about 20 kg belong on freight, not on a courier parcel product. The reverse lane, Kanpur to Jamnagar, is cell N1 → W1, not W1 → N1, so a return of rejected stock gets its own rate.

When should I still book a parcel instead?

When the whole consignment is light: below roughly the weight where the calculator above shows the crossover, the parcel slab is cheaper because the matrix minimums are charging you for kilos you don't have.

On the example numbers the crossover is around 6 kg. Your real crossover depends on your two quotes, and it moves with every lane. A few kilos of samples to a distributor in Indore go as a parcel; a carton lot of 25 kg or more almost always goes as LTL. In between, run both. Quote the same pincodes once as a parcel and once as a B2B shipment on ShipSeth; both quotes itemise every line, so you compare totals, not headline rates.

Consignments above ₹50,000 need an e-way bill whichever product you pick; the e-way bill guide has a checker, and the lorry receipt guide covers the LR copies a freight booking produces.

Parcel and freight, one screen

See the Matrix Rate for Your Lane

Free to register, no monthly fee, prepaid wallet. Enter pickup and delivery pincodes, cartons and weight, and see freight, the LR minimum and every surcharge line before you book.

Frequently Asked Questions

What is per-kg matrix pricing in freight?
It is a rate card laid out as a grid: origin region down the side, destination region across the top, and one rupee-per-kg rate in each cell. Your freight is chargeable kilos multiplied by the rate in your cell, with a minimum weight and a minimum freight per LR. ShipSeth's B2B LTL cards use a 9 × 9 grid.
Why is B2B freight priced per kg and not in 500 g slabs?
Because B2B consignments are tens or hundreds of kilos. A 500 g step is noise on a 300 kg load, so the card prices every kilo at one rate and puts the fixed cost of handling a consignment into a minimum weight, a minimum freight and a per-LR line instead.
How is the region decided for my pincode?
By the state the pincode is in. ShipSeth looks up the pickup and delivery pincodes, matches each state to a region, and saves the pair so repeat quotes skip the lookup. On the 6 CFT card every pincode in a state shares its region; the 8 CFT card has separate rows for Himachal Pradesh, Jammu & Kashmir, the North East states and the cities of Guwahati, Baddi and Jammu.
Is the rate from A to B the same as from B to A?
Not necessarily. Each direction is its own cell. On ShipSeth's 6 CFT card, N1 to E and E to N1 carry different rates, and so do N1 to W1 and W1 to N1. Quote the lane in the direction you actually ship.
What is the minimum charge on B2B LTL freight?
There are two floors. The chargeable weight never goes below 20 kg on ShipSeth's B2B cards, and each LR has a minimum freight. If freight plus the per-LR processing line is still under that minimum, the freight line is topped up to meet it.
Does distance matter at all on a matrix card?
Only through the region. Delhi to Jaipur and Delhi to Lucknow are both N1 to N1, so they price the same per kg even though one drive is much longer. Parcel slab cards are different: their zones are built from distance bands and metro status.