6 CFT vs 8 CFT: Which B2B Freight Product Costs Less
Two LTL products, same trucks, same hubs, different arithmetic. Which one is cheaper depends on how heavy your cargo is for its size and on the per-kg rate for your lane. Here is how to tell in a minute, with a checker that does the sums.
Quick Answer
6 CFT and 8 CFT set how many kilos each cubic foot of cargo counts for: 6 or 8, a divisor of 4,500 or 3,375 on Delhivery B2B LTL. Cargo over 8 kg per cubic foot bills actual weight on both. Lighter cargo bills more kilos on 8 CFT, so it only wins with a clearly lower per-kg rate.
6 CFT or 8 CFT for this consignment?
Rates are yours to enter. We don't prefill them because they change by lane and by account.
6.75 kg per 30 cm cube. Middle band. 6 CFT bills your actual weight, 8 CFT bills volumetric weight, so 8 CFT counts more kilos. It wins only if its per-kg rate is low enough to cover the gap.
Actual 480 kg · volume 19,20,000 cm³ · volumetric 426.7 kg at ÷ 4,500 and 568.9 kg at ÷ 3,375. Chargeable weight is worked out on the whole consignment, rounded up to the next kg, with a 20 kg minimum, the way ShipSeth's B2B cards do it. The break-even figure means: 8 CFT costs less on freight only if its per-kg rate is below this share of the 6 CFT rate. For one box at a time, use the volumetric weight calculator.
What do 6 CFT and 8 CFT actually mean?
CFT is the minimum number of kilos the carrier counts for every cubic foot your cargo takes up. A 6 CFT product says each cubic foot weighs at least 6 kg on the bill. An 8 CFT product says at least 8 kg.
The "cubic foot" here is a trade convention, not the textbook one. Delhivery's B2B LTL cards treat it as a 30 cm cube, which is 27,000 cm³. Divide that by the CFT number and you get the divisor that turns centimetres into kilos:
6 CFT: L × B × H (cm) ÷ 4,500 · 8 CFT: L × B × H (cm) ÷ 3,375
You will hear transporters say "6 CFT" as if it were a service level. It isn't. Both products move on the same LTL network through the same hubs, and the lorry receipt looks the same. The number only changes how your cartons are converted into chargeable kilos, plus the rate card those kilos are priced on.
Why does the same carton weigh more on 8 CFT?
Because 3,375 is a smaller divisor than 4,500, so the same volume produces a third more volumetric kilos.
Take one carton of 60 × 40 × 40 cm. That is 96,000 cm³. At 6 CFT it counts as 21.3 kg; at 8 CFT, 28.4 kg. If the carton actually weighs 24 kg, 6 CFT bills the scale weight and 8 CFT bills the volume. Same box, same truck, different bill.
One detail that trips people up: on ShipSeth's B2B cards the volume of all cartons is added up first and the round-up to the next kg happens once, on the total. Ten cartons are not rounded ten times. The 20 kg floor also applies to the consignment, not to each carton.
Which is cheaper, 6 CFT or 8 CFT?
Neither one across the board; the answer comes from your cargo's density first and your lane's per-kg rates second.
Work out how many kilos your cargo weighs per 30 cm cube (the checker above does it). That number puts you in one of three bands:
| Density band | 6 CFT bills | 8 CFT bills | What decides it |
|---|---|---|---|
| Dense: 8 kg or more per 30 cm cube | Actual weight | Actual weight | Same kilos on both. Take the lower per-kg rate, then check the surcharge lines. |
| Middle: 6 to 8 kg per cube | Actual weight | Volumetric (÷ 3,375) | 8 CFT bills up to a third more kilos. It needs a clearly lower rate to win. |
| Light: under 6 kg per cube | Volumetric (÷ 4,500) | Volumetric (÷ 3,375) | 8 CFT bills about 33% more kilos. It wins only below roughly 75% of the 6 CFT rate. |
Dense goods (tiles, machine parts, bagged chemicals, steel utensils) almost always land in the first band. Packed garments, shoes in boxes and FMCG cartons often sit in the middle. Furniture, lampshades, plastic household goods and anything in thermocol is light.
On the rates themselves we will be straight with you: the 8 CFT card's per-kg rate is lower than 6 CFT on some region pairs and equal or higher on others. So don't assume 8 CFT is the "cheap" product or the "expensive" one. Put both quotes side by side for the lane you actually ship.
What does the choice look like on real cargo?
Three worked examples. Cartons and weights are illustrative; the divisors, rounding and regions are the ones ShipSeth's B2B cards apply. No rates are shown because they depend on your account and lane.
Example 1: floor tiles, Morbi to Jaipur
40 boxes, each 62 × 62 × 8 cm and 30 kg. Morbi is in W1 (Gujarat), Jaipur in N1 (Rajasthan).
Actual 1,200 kg · volume 12,30,080 cm³ · 6 CFT: ÷ 4,500 = 273.4 kg · 8 CFT: ÷ 3,375 = 364.5 kg · density 26.3 kg per cube · chargeable 1,200 kg on both
Tiles are so heavy that volume never gets a look in. Both products bill 1,200 kg, so pick on rate. One catch: at 400 kg and above the 8 CFT card adds a handling line that 6 CFT does not, so look at the total, not the freight row.
Example 2: knitted garments, Tiruppur to Bengaluru
20 cartons, each 60 × 40 × 40 cm and 24 kg. Both cities sit in S1 (Tamil Nadu, Karnataka).
Actual 480 kg · volume 19,20,000 cm³ · 6 CFT: 426.7 kg → bills 480 kg actual · 8 CFT: 568.9 → 569 kg · density 6.75 kg per cube · break-even 480 ÷ 569 = 84.4%
This is the middle band, and the one most people misjudge. 6 CFT bills the scale weight; 8 CFT bills 89 kg more. 8 CFT is cheaper on freight only if its per-kg rate on this lane is under 84.4% of the 6 CFT rate.
Example 3: lampshades in thermocol, Delhi to Kolkata
12 cartons, each 60 × 50 × 50 cm and 9 kg. Delhi is in N1, Kolkata in E (West Bengal).
Actual 108 kg · volume 18,00,000 cm³ · 6 CFT: 400 kg · 8 CFT: 533.3 → 534 kg · density 1.6 kg per cube · break-even 400 ÷ 534 = 74.9%
You are paying to move air either way. On 6 CFT you pay for 400 kg, on 8 CFT for 534 kg. Unless the 8 CFT rate is under three-quarters of the 6 CFT rate, book 6 CFT, and before that, ask whether a smaller carton would do.
What else is different between the two products?
Each product has its own rate card, so the divisor is only the first of several differences.
| Line | 6 CFT | 8 CFT |
|---|---|---|
| Volumetric divisor | 4,500 (27,000 ÷ 6) | 3,375 (27,000 ÷ 8) |
| Weight rule | Higher of actual and volumetric, whole consignment, rounded up to the next kg, 20 kg minimum | Same |
| Per-kg rate | Its own 9 × 9 region grid | Its own grid; lower than 6 CFT on some lanes, equal or higher on others |
| Special destination rows | None: every pincode prices on its broad region | Himachal Pradesh, Jammu & Kashmir, the North East states, and the cities of Guwahati, Baddi and Jammu price on their own rows |
| Minimum freight per LR | Yes | Yes, and higher than 6 CFT |
| Handling charge | None at any weight | Per kg on consignments of 400 kg and above |
| Fuel surcharge, carrier's-risk ROV, re-attempt, To-Pay | Its own percentages and minimums | Different percentages and minimums from 6 CFT |
| Delhivery account | Booked under the 6 CFT client account | Booked under a separate 8 CFT client account |
The special destination rows matter if you ship into the hills or the North East. On 6 CFT, a pincode in Shimla prices on the N2 region like Ludhiana does. On 8 CFT, Himachal Pradesh has its own row, and so do Baddi, Jammu and Guwahati as cities. For a pharma box out of Delhi to Baddi, that can swing the comparison either way, so quote both.
The separate Delhivery accounts are mostly invisible to you, but they explain one thing you may notice: an LR booked on 6 CFT is created and tracked under the 6 CFT account, and your pickup warehouse is registered under that account too. Once the LR exists it belongs to that product. To move the consignment to the other product, cancel it and book again.
Region codes are the same nine on both cards. The LTL vs PTL vs FTL guide lists which states sit in N1, N2, E, NE, W1, W2, S1, S2 and Central. The Hindi version of this guide, CFT क्या होता है, adds a check that works backwards from the chargeable kilos printed on a quote or LR.
How do I pick between 6 CFT and 8 CFT on ShipSeth?
Enter the consignment once and compare the two rows the courier options show you.
Measure cartons as packed
Measure the outside of the carton after strapping, at the widest point. A 1 cm bulge on every face of a 60 × 40 × 40 carton makes it 62 × 42 × 42 and adds about 14% to its volume, and on light cargo that goes straight onto the bill.
Create the B2B shipment
Enter pickup and delivery pincodes, number of boxes, dimensions and weight. Every box gets its own label later, with a box AWB, the master AWB and the LR number.
Compare the two Delhivery B2B rows
The options list shows Delhivery B2B LTL 6cft and Delhivery B2B LTL 8cft separately, each with its own chargeable weight, surcharge lines and total. Compare totals, not freight alone.
Book the lower total
If both are close, prefer the one where your cargo bills actual weight: a re-measured carton then can't push the bill up on volume.
If you only see one of the two rows, either your account has a custom B2B rate assignment for one product, or the other product doesn't serve that pincode pair. Ask support if you want both quoted.
What happens if Delhivery re-measures my cartons?
The correction is billed on the same product you booked, not on whichever card looks worse.
ShipSeth pins every weight correction to the exact rate card quoted at booking. A 6 CFT consignment re-measured at the hub is re-priced on the 6 CFT card. If you think the new weight or size is wrong, raise a weight dispute inside the courier's dispute window (five days from the day the correction is posted, unless that courier has its own window) with at least one photo of the packed carton on a weighing scale showing the reading. For a size dispute, we'd also photograph the tape across each side; it settles arguments quickly. Light cargo gets re-measured more often than dense cargo, simply because a centimetre matters more when volume decides the bill.
Above ₹50,000 of consignment value you also need an e-way bill before booking, on either product; the e-way bill guide has a checker for that.
Both products, one screen
Quote 6 CFT and 8 CFT Side by Side
Free to register, no monthly fee. Enter pincodes, cartons and weight once, and see chargeable weight and every surcharge line for each product before you book.