← Shipping GuideB2B Logistics

B2B Courier for Manufacturers in India: How to Book a Factory Consignment Right the First Time

Fourteen cartons for a dealer in Pune are one consignment, not fourteen parcels. This guide covers how ShipSeth decides a booking is B2B, the two documents that stop most first bookings, and which lines turn up on a freight quote. Run your next dispatch through the check below before the pickup boy reaches the gate.

🏭
ShipSeth Research Desk
Delhi, India · Updated 9 November 2026

Quick Answer

A B2B courier moves a manufacturer's multi-carton consignment to a dealer or distributor on one lorry receipt, priced per chargeable kg between freight regions instead of parcel slabs. On ShipSeth, any booking with more than one piece is quoted as B2B cargo. You need the tax invoice PDF, its number and amount, and an e-way bill above ₹50,000.

Is this dispatch ready to book as B2B?

308 kg
Actual weight
224 kg
Size-based weight (÷ 5000)
B2B cargo only
Rates you will see

14 pieces on one booking. Anything over one piece is quoted as B2B cargo, and parcel rates are hidden.

Will stop the booking

  • Invoice is ₹1,80,000, above ₹50,000. Generate the e-way bill first; the form will not move past the address step without its number.

In order

  • Invoice amount ₹1,80,000 entered. Keep the invoice number to hand as well; both are mandatory on B2B.
  • Tax invoice PDF ready to attach.
Line on the B2B quoteWhy it is there for this dispatch
FreightChargeable kg × the per-kg rate for your origin and destination regions. Billed weight never goes under 20 kg, and a minimum freight applies per LR.
ProcessingOne flat line per LR, whatever the number of cartons.
Fuel surchargeA percentage of freight.
Risk on value (owner)The default. A small minimum line; you carry the loss risk, so insure the goods yourself.
First-mile pickupPer kg, for collecting from your gate. Tick Self Drop and it comes off.
Green taxPer kg with a minimum, once per shipment, because the pickup or drop is in Delhi.
ODA (only if remote)Added automatically if the delivery pincode is out of the courier's regular delivery area.
GST 18%On the subtotal of everything above.

The piece and weight rules, the invoice checks and the e-way bill check are the ones ShipSeth's booking form applies. The ÷ 5000 figure is the form's quick size check for the 10 kg gate; the B2B card then works out its own chargeable weight under the 6 CFT or 8 CFT rule, which the 6 CFT vs 8 CFT guide explains. Amounts come from your live quote; this check shows which lines to expect, not what they cost.

What is a B2B courier, and how is it different from a parcel courier?

A B2B courier carries a consignment from one business to another on a single lorry receipt, and bills it per kilo between two regions.

A parcel courier is built around one box going to one shopper. Its rate card charges the first half-kilo heavily and each further half-kilo less, by distance zone. That is the right shape for a 900 g kurta. It is the wrong shape for 300 kg of brake shoes going from a Bawana unit to a stockist, where what matters is kilos on a shared truck and the paperwork that travels with them.

FactorParcel (B2C)Freight (B2B)
What you hand overOne box or one bagA consignment: several cartons, bags or bales on one LR
How the price is builtFirst 500 g, then each extra 500 g, by distance zoneChargeable kg × a region-to-region rate, minimum 20 kg
Paperwork ShipSeth makesOne shipping labelLorry receipt in three copies and a label for every carton
Paperwork you bringInvoice value; e-way bill above ₹50,000Invoice number, amount and PDF; e-way bill above ₹50,000
Who receives itA shopper at homeA dealer, distributor, stockist or another plant

The pricing side has its own guide: per-kg matrix pricing walks through the region grid and the two minimums. This page is about the booking.

When does ShipSeth book my shipment as B2B freight?

The moment a booking has more than one physical piece, or a single piece reaches 10 kg.

More than one piece means B2B cargo quotes only. ShipSeth hides parcel rates entirely for multi-piece bookings, because a dealer order of six cartons should travel and be signed for as one consignment. A single piece of 10 kg or more gets both: parcel quotes and cargo quotes in one list, cheapest first. Below 10 kg it is a parcel, full stop.

Our advice: don't game this by booking six cartons as six separate one-piece parcels. You lose the single LR your dealer signs against, every carton gets its own parcel minimum, and a shortage claim turns into six separate tracking numbers to chase. Book the consignment as what it is.

How do I book a B2B consignment on ShipSeth, step by step?

Five steps on one form, and the only thing you need ready before you start is the invoice.

01

Pickup point, pincodes, pieces

Pick the factory or godown you are shipping from, type the dealer's pincode, then add the pieces. Enter identical cartons once with a quantity: 14 × 22 kg, 50 × 40 × 40 cm. Mixed sizes go on separate rows.

02

Two switches before the quote

Owner Risk is on by default. Switch to Carrier Risk if you want the carrier to carry the loss liability on this consignment. Tick Self Drop if your own tempo will take the cartons to the hub. Both change the quote, so set them before you compare.

03

Compare the cargo quotes

Each B2B quote shows the chargeable weight it is billing and every line on top of freight. If you see a 6 CFT and an 8 CFT quote with different chargeable weights, that is the cubic-feet rule at work, not an error.

04

Receiver, invoice, e-way bill

Fill the dealer's address, then the invoice number and invoice amount, attach the tax invoice PDF, and add the e-way bill number if the invoice is above ₹50,000. Check the return address: an RTO comes back there, not necessarily to the factory.

05

Book, print, hand over

Confirm, and the wallet is debited for the quoted amount. Print the lorry receipt and one label per carton, stick each label on a flat face, and hand over the cartons, with the Consignee Copy and the POD · Carrier Copy in a pouch, to the pickup boy or the hub counter. Keep the Consignor Copy.

After that, the consignment shows in the same shipments list as your parcels, with the LR number, the master AWB and the carton labels downloadable from the shipment. If the carrier re-weighs it at the hub, the correction is priced on the same card you were quoted, and you can raise a weight dispute with your own photos and measurements.

What will stop a B2B booking from going through?

Three things, and all three are about the invoice.

  1. No invoice number or invoice amount. The carrier's B2B manifest rejects the whole booking without either one, so ShipSeth won't send it.
  2. No tax invoice PDF. A B2B booking needs the file attached before it is created. A proforma or a delivery challan photo is not what the carrier wants here; attach the GST tax invoice.
  3. Invoice above ₹50,000 with no e-way bill number. The form stops at the address step. Generate the e-way bill on the GST portal first; the e-way bill guide has a checker for whether your shipment needs one and what goes in Part B.

Factories usually trip on the third one. Accounts raises the invoice in the evening, the dispatch clerk books in the morning, and nobody generated the e-way bill in between. Make it part of the invoicing step, not the booking step.

If your desk books several dealers a day, the Hindi version of this guide has a dispatch sheet that takes the whole day at once, keeps two dealers in the same town on separate LRs, and writes the evening slip for accounts and the label count for the godown.

Which charges appear on a B2B freight quote?

Freight, a flat processing line per LR, fuel, risk on value and GST on every consignment, plus up to three lines that depend on your switches and your addresses.

The three conditional lines are the ones manufacturers ask about. First-mile pickup is charged per kg for collecting from your gate and comes off when you tick Self Drop; if your unit is a short run from the carrier hub and you have your own vehicle, compare the two quotes. Green tax is Delhi's environment charge on goods vehicles, and the quote adds it once when the pickup or the delivery address is in Delhi. ODA is added automatically when the delivery pincode is outside the courier's regular delivery area; check a dealer's pincode on the serviceability and ODA checker before you promise a date.

Risk on value is always there in one of two forms. Owner risk is the default and costs little because you carry the loss. Carrier risk is a percentage of the invoice value with a minimum, and moves the liability to the carrier. For engine parts or pharma worth a few lakh, read the owner's risk vs carrier's risk guide before you leave the default on.

Every one of these lines is itemised on the quote before you book, and the wallet is debited for that total.

What does a real factory dispatch look like?

An example, with made-up but realistic numbers, run through the same check as the tool above.

A brake-component unit in Bawana, Delhi, ships 14 cartons to a dealer in Pune. Each carton is 22 kg and 50 × 40 × 40 cm. The invoice is ₹1,80,000. The firm has its own tempo but the hub is across the city.

14 pieces → B2B cargo only · 14 × 22 = 308 kg actual · 14 × (50 × 40 × 40 ÷ 5000) = 224 kg by size · bills on actual weight

Before booking: invoice number, amount and PDF from accounts, and an e-way bill, because ₹1,80,000 is well above ₹50,000. On the quote: freight on the N1 (Delhi) to W2 (Maharashtra) rate, processing, fuel, risk on value, first-mile pickup and green tax, since the pickup is in Delhi, then GST. With brake parts worth ₹1.8 lakh on one LR, the dispatch manager should price carrier risk too and look at the difference; it is one switch.

The same unit sends a single 12 kg carton of samples to a distributor in Jaipur. Invoice ₹9,000.

1 piece, 12 kg → parcel and B2B quotes side by side · no e-way bill needed

Here the parcel quote often wins, because a B2B card bills at least 20 kg and carries a minimum freight per LR. Pick whichever total is lower. If it is the B2B quote, the invoice PDF is still mandatory.

Which manufacturers should ship B2B rather than by parcel?

Anyone whose normal dispatch is several cartons to a short list of repeat buyers.

That covers most of the factory belts we ship out of: auto components in Faridabad and Mohali (spare parts sellers have their own auto parts shipping guide, with the battery and bumper rules), hardware and fasteners in Ghaziabad, pharma out of Baddi, scientific instruments from Ambala, Agra's footwear units, and textile mills in Surat and Bhiwandi, where bales and rolls have their own packing rules covered in the fabric manufacturers guide. Distributors who break bulk and re-ship to retailers have a different question, which the bulk rates for distributors post answers.

If a load fills most of a truck, LTL is probably not your mode at all. ShipSeth books LTL, not part-load or full-truck; the LTL vs PTL vs FTL guide shows where that line sits.

How do manufacturers pay for B2B freight on ShipSeth?

From the same prepaid wallet as parcels, one consignment at a time.

Registration is free and there is no monthly fee. You top up the wallet, see the full quote for a consignment, and the wallet is debited when you book. There is no separate freight account, no minimum monthly tonnage and no plan to pick. The pricing page sets out the billing model in full.

Quote the consignment, not the carton

See a B2B Freight Quote for Your Next Dispatch

Free to register, no monthly fee. Enter pincodes and cartons, and every line of the freight quote shows before you book.

Frequently Asked Questions

What is the difference between a B2B courier and a normal parcel courier?
A parcel courier prices one box at a time in weight slabs by distance zone. A B2B courier moves a consignment of several cartons or bags on one lorry receipt, priced per chargeable kg between two freight regions, with a minimum weight and a minimum freight per LR. Manufacturers shipping to dealers and distributors usually need the second.
When does ShipSeth treat my shipment as B2B?
Two rules. If the booking has more than one physical piece, ShipSeth quotes it as B2B cargo only. If it is a single piece, B2B cargo rates appear next to parcel rates once the applicable weight reaches 10 kg, and the list is sorted cheapest first.
What documents do I need to book B2B freight on ShipSeth?
The tax invoice as a PDF, plus its invoice number and invoice amount typed into the booking. If the invoice is above ₹50,000 you also need the e-way bill number. The lorry receipt and one label per carton are generated by ShipSeth after booking, so you do not bring those.
Which courier carries B2B freight booked on ShipSeth?
B2B freight on ShipSeth runs on Delhivery's B2B LTL network today, on two products: 6 CFT and 8 CFT. They differ in how many cubic feet of carton count as one unit of chargeable weight, so the same cartons can bill differently on each.
Can I drop the cartons at the hub instead of booking a pickup?
Yes. Tick Self Drop on the rate screen before you pick a quote. The first-mile pickup line comes off the quote, and you take the cartons, with the Consignor Copy of the LR and a label on every carton, to the carrier hub.
Do I need a separate account for B2B and B2C shipments?
No. One ShipSeth account books both, from the same pickup points and the same prepaid wallet. The booking form decides which rates to show from the number of pieces and the weight you enter.