← Shipping GuideIndustry Guides

How to Ship Auto Parts in India: Bumpers, Batteries and Dealer Lots

A box of brake pads weighs more than a front bumper, and the bumper still bills eight times the kilos. Spare parts sellers lose money on three things: carton size, contents the hub will pull off, and booking a dealer's twelve cartons as twelve parcels. This guide takes each in turn, with a check for your own part.

🔧
ShipSeth Research Desk
Delhi, India · Updated 13 November 2026

Quick Answer

To courier auto parts in India, pack each part so it can't move, then weigh and measure the packed carton. Couriers bill the higher of actual weight and size weight (L × B × H in cm ÷ 5,000), so bumpers and tyres bill on size. Several cartons for one dealer go as B2B freight on one lorry receipt. Lead-acid batteries need support's confirmation first.

What will this part bill, and will the courier take it?

Ships normally

  • Unrestricted, but almost always billed on size, not weight.
  • Packing: Wrap the painted face in foam sheet, cover the clips and mounting tabs, and build the carton to the part. Every spare centimetre of carton is billed.
  • Contents line to type: Front bumper, painted, 1 pc
72 kg
Parcel billed weight
80 kg
B2B 6 CFT billed
107 kg
B2B 8 CFT billed
Parcel + B2B
Quotes you will see

Actual weight 6 kg, size weight 72 kg (÷ 5,000). The carton's size, not the part's weight, sets the parcel bill.

Carton tip: This piece weighs 6 kg but bills 72 kg on size. Every 5 cm off the carton height takes 9 kg off the billed weight. Even a much flatter box would still bill on size, so build the carton to the part rather than reusing a stock box.

Paperwork for this booking

  • If you pick the B2B quote, the invoice number, amount and PDF become mandatory. The parcel quote needs only the invoice value.

Parcel weight is rounded up to the next 500 g; B2B weight is rounded up to the next kg with a 20 kg minimum, on the 6 CFT (÷ 4,500) and 8 CFT (÷ 3,375) rules explained in the 6 CFT vs 8 CFT guide. These are kilos, not prices: the rupee total for each option shows on your live quote.

Why does a light bumper cost more to courier than heavy brake parts?

Because a parcel courier bills whichever is higher, the scale reading or the space the carton takes up on the van.

Space is turned into kilos with one formula: length × width × height in centimetres, divided by 5,000. Dense parts never reach that number. Body parts, lamps and tyres always do. The table runs typical spare-parts cartons through the same rule ShipSeth's parcel rate cards use (example sizes, not measurements from a particular shipment):

PartPacked cartonActualSize weightBilled on
Brake pads, 4 sets30 × 20 × 15 cm9 kg1.8 kg9 kg (actual)
Headlamp assembly60 × 40 × 35 cm4 kg16.8 kg17 kg (size)
Tyre 185/65 R1565 × 65 × 20 cm (wrapped)8 kg16.9 kg17 kg (size)
Front bumper180 × 50 × 40 cm6 kg72 kg72 kg (size)
Same bumper, carton cut to 30 cm180 × 50 × 30 cm6 kg54 kg54 kg (size)

The last row is the one worth acting on. Cutting 10 cm off the bumper carton's height takes 18 kg off the bill and does nothing to the protection, because the extra height was air. Most bumpers come from the supplier in an oversized stock carton; re-box them before they go out. The box size calculator picks the carton from your own stock that bills the lowest slab, and the volumetric weight calculator takes a mixed lot of carton sizes.

Which auto parts will a courier refuse?

Lead-acid batteries, and anything else that is corrosive or flammable, unless the courier has said yes to it in advance.

Three groups cause nearly all the trouble in this trade:

  1. Lead-acid car and bike batteries. A filled battery is a box of sulphuric acid. ShipSeth's merchant agreement bars corrosive material unless a courier expressly permits it and it is declared and packed for it. Don't book one until support has named a courier that takes it.
  2. Lithium batteries for EVs and scooters. Restricted, not barred: they go by surface only, and only with a courier that has confirmed it carries them. Never on an air booking.
  3. Oils, coolant and brake fluid. Liquids are restricted. Sealed original cans, each bagged, upright, by surface, with a courier support has confirmed.

Used parts are their own problem. A second-hand gearbox or a returned core that still holds oil will leak through the carton by the second hub. Drain it, bag it in heavy poly, and then box it. The full contents list, with a search box, is in the prohibited and restricted items guide.

Whatever the part, name it on the booking. ShipSeth sends the order item name to the courier as the commodity on the label. "Auto parts" on a carton that sloshes is how a parcel gets held at the hub and returned at your cost.

How should spare parts be packed so they arrive in one piece?

Nothing should move when you shake the closed carton. That one test catches most of the damage claims in this trade.

Heavy parts break their own cartons. A 20 kg box of bearings with a 2 cm gap at the top will slam into that gap on every sorter belt until the corner splits, so fill every void and tape the seams in an H, not a single strip. Light parts get crushed by the heavy ones stacked on top of them: a headlamp needs a double-wall carton and real padding, 5 cm on every side, with the lens facing in. Painted panels need their face covered with foam sheet, because the scratch claim you'll get otherwise is very hard to win.

Photograph the packed carton open and closed, and on a scale with the tape measure visible. Those photos are your evidence in a weight dispute if the courier re-weighs it (the evidence kit captions them and writes the claim), and in a damage claim if the lamp arrives cracked. The general packing method, with a carton-strength check, is in how to pack a parcel for courier.

Should a dealer order go as parcels or as B2B freight?

If it's more than one carton for the same dealer, book it as one B2B consignment.

ShipSeth decides this from the booking itself. Two or more pieces on one booking are quoted as B2B cargo only. A single carton of 10 kg or more gets parcel and B2B quotes side by side, cheapest first. Below 10 kg, it's a parcel. B2B freight is billed per kilo between two regions with a 20 kg minimum, travels on one lorry receipt, and needs the tax invoice number, amount and PDF at booking.

Don't split a dealer's lot into separate parcels to dodge the 20 kg minimum. Each parcel then carries its own first-slab charge, the dealer has no single LR to sign against, and if one carton goes short you're chasing a separate AWB for every box. For a mixed lot, put identical cartons on one row with a quantity and different sizes on separate rows.

Example: a bearings and clutch-kit wholesaler in Faridabad sends 12 cartons to a dealer in Indore. Each carton is 40 × 30 × 25 cm and 18 kg. Invoice ₹96,000.

12 pieces → B2B only · 216 kg actual · 6 CFT size 80 kg · 8 CFT size 107 kg · both bill 216 kg

The parts are dense, so the CFT rule doesn't matter here and the lower per-kg rate on the lane wins. The invoice is above ₹50,000, so the e-way bill has to exist before booking. With ₹96,000 of stock on one LR, price carrier's risk as well as the default owner's risk; the owner's risk vs carrier's risk guide explains the difference.

Example: a Ludhiana seller sends one front bumper to a body shop in Jaipur. Carton 180 × 50 × 40 cm, 6 kg. Invoice ₹7,500.

1 piece at 72 kg size weight → parcel and B2B quotes · parcel 72 kg · 6 CFT 80 kg · 8 CFT 107 kg

The parcel option counts the fewest kilos, but per-kg rates differ between the products, so compare the totals on the quote screen. Then re-box to 30 cm and run it again: the parcel figure drops to 54 kg.

The booking flow for factory and wholesale consignments, step by step, is in the B2B courier for manufacturers guide.

When does a spare parts shipment need an e-way bill?

On ShipSeth, whenever the invoice value is above ₹50,000: the booking won't go through without the e-way bill number.

Retail orders to mechanics and car owners rarely get near that. Dealer restocks do, and they tend to cross it on the day accounts adds one more item to the invoice. Generate the e-way bill when the invoice is raised, so the dispatch desk is never the place where the lot gets stuck. The e-way bill guide has a checker for whether your consignment needs one and what goes in Part B.

How do spare parts sellers pay for shipping on ShipSeth?

Per shipment, from a prepaid wallet, with the full quote shown before you book.

Registration is free and there's no monthly fee or plan. Parcels to mechanics and B2B lots to dealers go from the same account, the same pickup points and the same wallet. Prepaid and COD both work on parcel bookings; COD money is remitted twice a week, every Tuesday and Friday. Before your first booking, check a buyer's pincode on the serviceability and ODA checker and price a carton on the shipping rate calculator. The pricing page has the billing model in full.

Measure the carton, then compare

Quote Your Next Spare Parts Shipment

Free to register, no monthly fee. Enter the packed carton and every courier's billed weight and total shows before you book.

Frequently Asked Questions

How do I courier auto parts in India?
Pack each part so it cannot move inside the carton, weigh and measure the packed carton, and book it with the part name as the contents line. One carton below 10 kg goes as a parcel; several cartons for one buyer go as one B2B consignment on a lorry receipt. Lead-acid batteries, oils and lithium packs need a courier confirmed by support first.
Can I send a car battery by courier?
Not as an ordinary parcel. A filled lead-acid battery contains acid, which is corrosive material, and ShipSeth's merchant agreement bars corrosives unless a courier expressly permits them and they are declared and packed for it. Ask support before booking. Lithium EV and scooter batteries are restricted: surface only, with a courier that has confirmed it accepts them.
Why is my bumper charged at 70 kg when it weighs 6 kg?
Because parcel couriers bill the higher of actual weight and size weight, and size weight is length × width × height in cm divided by 5,000. A 180 × 50 × 40 cm bumper carton works out to 72 kg. Cut the carton down to the part: every centimetre you take off the height comes off the bill.
Should auto parts go as a parcel or as B2B freight?
A single carton under 10 kg is always a parcel. A single carton of 10 kg or more gets both quotes side by side, and you pick the lower total. Two or more cartons on one booking go as B2B cargo only, with a 20 kg minimum and one lorry receipt for the dealer to sign.
Do I need an e-way bill for spare parts?
On ShipSeth, any booking with an invoice value above ₹50,000 needs an e-way bill number before it will go through. A dealer lot of bearings or clutch kits crosses that quickly, so generate the e-way bill when accounts raises the invoice, not at the dispatch desk.
What should I write as the contents for an auto part?
The part name, condition and count, for example "Headlamp assembly, left, 1 pc" or "Oil filters, 10 pcs (new)". ShipSeth sends the order item name to the courier as the commodity printed on the label. "Auto parts" or "General goods" tells the hub nothing and makes a battery or a can of oil look hidden.