← Shipping GuideB2B Logistics

Shipping for Fabric Manufacturers in India: What a Roll Weighs, What It Bills, How to Send the Lot

Your roll tag already says metres, width and GSM. That is enough to know the kilos before the roll reaches the scale, and to know whether the courier will bill you on kilos or on size. This guide turns those three numbers into a billed weight, and shows when eight rolls for one buyer should travel as one consignment.

🏭
ShipSeth Research Desk
Delhi, India · Updated 9 November 2026

Quick Answer

A fabric roll bills on the higher of its actual weight and the box it fits in: packed length × diameter × diameter. Roll weight is metres × width in metres × GSM ÷ 1,000, plus the core. On ShipSeth, two or more rolls on one booking travel as B2B freight on one lorry receipt, 20 kg minimum.

Fabric roll weight and billed-weight planner

36.9 kg
One roll (35.4 kg cloth + core)
37 kg
One roll as a parcel, billed (kilos win)
B2B cargo only
Rates ShipSeth will show

8 rolls on one booking. ShipSeth quotes anything over one piece as B2B cargo on a single lorry receipt; parcel rates are not shown.

All 8 rolls on one LR6 CFT (÷ 4,500)8 CFT (÷ 3,375)
Actual weight294.9 kg294.9 kg
Size-based weight183.9 kg245.2 kg
Chargeable (whole kg, 20 kg min)295 kg295 kg

9.6 kg per 30 cm cube. Dense roll. Both 6 CFT and 8 CFT bill the real kilos, so pick between them on the per-kg rate alone.

Box per roll: 153 × 26 × 26 cm. The 10 kg gate, the one-piece rule and the 500 g parcel rounding are the ones ShipSeth's booking form uses; the CFT divisors and 20 kg minimum are those on the B2B LTL cards (see the 6 CFT vs 8 CFT guide). This shows kilos, not rupees. Your live quote prices them. The GSM formula is the standard area × GSM method (Online Clothing Study, checked 27 October 2026).

How do I work out what a fabric roll weighs?

Metres × width in metres × GSM, divided by 1,000, gives the kilos of cloth on the roll.

GSM is grams per square metre, so the sum is just the area of cloth on the roll times what each square metre weighs. Width on the tag is usually in inches; multiply by 0.0254 to get metres. A 58-inch roll is 1.473 m wide. Sixty metres of that at 400 GSM is 60 × 1.473 × 400 ÷ 1000, which is 35.4 kg of denim.

Then add what isn't cloth. The core tube, the poly sleeve and the outer wrap all go on the courier's scale with the roll. Weigh one finished roll once and keep the number for that quality; it won't change from lot to lot by more than the GSM tolerance on your own test report.

GSM drifts along a roll and between lots, so treat the formula as your planning figure and the scale as the booking figure. Declare what the scale says.

Are fabric rolls billed by actual weight or by size?

By whichever is higher, and for most woven cloth that is the actual weight.

A courier can only measure a roll with a tape: the length end to end and the diameter, taken twice. So a roll is billed as the box it would fit in, corners and all, even though a cylinder fills only about four-fifths of that box. For a parcel, that box volume is divided by 5,000. For B2B freight it is divided by 4,500 on 6 CFT and 3,375 on 8 CFT.

Heavy, tightly wound cloth beats every one of those divisors. Light cloth doesn't always. Here is how the common qualities tend to fall:

ClothTypical dispatch townsUsually bills onWhat to watch
Denim, canvas, suitingAhmedabad, BhilwaraActual weight, nearly alwaysChoose 6 CFT or 8 CFT on the per-kg rate alone. Declare the scale weight to the half kilo.
Cotton poplin, cambric, shirtingIchalkaranji, BhiwandiActual weight when tightly woundCheck the diameter. A loose roll on a fat core can tip into size billing.
Grey cloth in balesBhiwandi, Malegaon, SuratActual weightA pressed, strapped bale is about as dense as cloth gets. Weigh it; don't estimate from metres.
Georgette, chiffon, net, liningSuratOften size, especially on 8 CFTRun the planner before you pick 8 CFT. Thinner cores and tighter winding pay back here.
Knit fabric sold by the kiloTiruppur, LudhianaDepends on the rollYou already know the kilos from the invoice. Tick "I weighed one roll" and enter it.

The lever you control is diameter. A thinner core and tighter winding shrink the box without changing the kilos, and on a light quality that can be the difference between paying for cloth and paying for air. The volumetric weight calculator does the same sum for cartons, if your rolls ship boxed.

Should fabric rolls go as parcels or as B2B freight?

One roll can go either way; several rolls for the same buyer should go as one B2B consignment.

ShipSeth decides what to quote from what you enter. Put two or more rolls on one booking and you get B2B cargo quotes only, because a lot should travel and be signed for as one consignment. Put one roll of 10 kg or more and you get parcel and B2B quotes in a single list, cheapest first. Under 10 kg, it's a parcel.

Don't split a lot into single-roll parcels to chase a parcel rate. Each roll then carries its own parcel slab and its own tracking number, the buyer gets eight deliveries to sign for instead of one, and a short-receipt complaint becomes eight separate shipments to trace. On B2B, billing is per kilo across the whole lot, with a 20 kg floor and a minimum freight per LR, so a heavier consignment spreads that floor thin.

The exception is the sample roll. A single roll going to a garment unit for approval is often cheaper as a parcel, because the B2B quote bills at least 20 kg. Example 1 below shows that case.

Mixed lots work the same way: the LR bills the total kilos against the total size, so a dense quality on the same consignment can cover a light one's bulk. The Hindi version of this guide has a lot sheet that takes several qualities at once, compares one LR with an LR per quality, and writes the buyer's packing list.

How do I prepare rolls for a B2B booking?

Get four numbers right before you book, because the hub will check every one of them.

01

Note the four numbers on the roll tag

Metres, width, GSM and lot number are on the tag your folding section already writes. Those three numbers give you the kilos before anyone puts the roll on a scale.

02

Weigh one roll with its core

The core tube and the poly sleeve are part of what the courier weighs. A cardboard core on a 58-inch roll can be a kilo or more; a PVC core weighs more. Weigh one finished roll and use that figure.

03

Measure length and diameter, not "about"

Tape the full packed length including the core ends, then the diameter at the fattest point. The courier does exactly this at the hub, and the larger of your number and theirs is the one you pay on.

04

Book all rolls for one buyer together

Enter identical rolls once with a quantity, for example 8 × 37 kg, 153 × 26 × 26 cm. Mixed lots go on separate rows of the same booking, and the whole lot travels on one LR.

Wrap every roll in a poly sleeve before anything else. Damp cloth gets rejected faster than a crushed core, and an LTL load changes trucks at least once at a hub. Bales should be pressed and strapped, not tied with twine. Stick one label per roll on the flat end or a flat stretch of the wrap, never across the curve where it peels.

What does a mill need to book fabric as B2B freight on ShipSeth?

The tax invoice, and an e-way bill when the invoice crosses ₹50,000.

  1. Invoice number and invoice amount, typed into the booking. The carrier's B2B manifest won't accept a consignment without them.
  2. The GST tax invoice as a PDF, attached before the booking is created. A delivery challan or a proforma is not a substitute.
  3. The e-way bill number if the invoice is above ₹50,000. For a lot of fabric that is most lots. Generate it when accounts raises the invoice, not when the truck is at the gate; the e-way bill guide covers when it is needed and what goes in Part B.

After you book, the prepaid wallet is debited for the quoted total, and ShipSeth generates the lorry receipt in three copies (Consignor Copy, Consignee Copy and POD · Carrier Copy) plus one label per roll. B2B freight on ShipSeth runs on Delhivery's B2B LTL network today, as two products, 6 CFT and 8 CFT. The lorry receipt guide explains who keeps which copy, and the B2B booking guide for manufacturers walks through the form screen by screen.

What do real fabric lots work out to?

Three labelled examples, worked with the planner above. Kilos only; your quote prices them.

Example 1: one sample roll of poplin, Ichalkaranji to a shirt unit in Bengaluru

100 m of 58-inch cotton poplin at 110 GSM, 1.2 kg core and wrap, 18 cm diameter, 153 cm packed length.

Fabric 100 × 1.473 × 110 ÷ 1000 = 16.2 kg · roll 17.4 kg · box 153 × 18 × 18 = 49,572 cm³ · parcel size weight 9.9 kg · parcel billed 17.5 kg · B2B at the 20 kg minimum

Actual weight wins comfortably. Because the roll is over 10 kg, ShipSeth shows the parcel quote and the B2B quote side by side. The B2B quote bills 20 kg, the parcel 17.5 kg, so for a single sample roll the parcel is often the one to pick. Compare the totals.

Example 2: eight rolls of denim, Ahmedabad to a jeans unit in Delhi

60 m per roll of 58-inch denim at 400 GSM, 1.5 kg core, 26 cm diameter.

Fabric 35.4 kg · roll 36.9 kg · 8 rolls 294.9 kg · total box volume 8,27,424 cm³ · 6 CFT 183.9 kg · 8 CFT 245.2 kg · chargeable 295 kg on both

Dense cloth. Both CFT products bill the real 295 kg, so the cheaper per-kg rate decides. All eight rolls go on one lorry receipt, and the jeans unit signs once for the lot.

Example 3: twenty rolls of poly georgette, Surat to a wholesaler in Kolkata

150 m per roll of 44-inch georgette at 60 GSM, 0.8 kg core, 20 cm diameter, 118 cm packed length.

Fabric 10.1 kg · roll 10.9 kg · 20 rolls 217.2 kg · total box volume 9,44,000 cm³ · 6 CFT 209.8 kg → chargeable 218 kg · 8 CFT 279.7 kg → chargeable 280 kg

This is the case that catches people. On 6 CFT the real kilos still win; on 8 CFT the same consignment bills 62 kg more on size. 8 CFT only comes out cheaper here if its per-kg rate is well under the 6 CFT rate on that lane.

What if the hub re-weighs my rolls?

You pay on the corrected weight unless you dispute it, and the dispute is won with photos taken before dispatch.

If the carrier's scale or tape disagrees with your booking, the correction shows on the shipment and is priced on the same rate card you were quoted. To contest it, open the shipment and raise a dispute: say whether your weight or your dimensions were right, enter the figure you declared, attach one to five photos and add a remark. For rolls, the photos that work are the roll on the scale with the reading and the roll tag both in frame, and a tape across the diameter. Take them for the first roll of every lot. It costs a minute at the folding table and saves an argument later.

The dispute that is hardest to win is the one where the roll was declared from the formula and nobody put it on a scale.

How do buyers pay for fabric shipped on ShipSeth?

You pay for the freight from a prepaid wallet; how your buyer pays you is between you and the buyer.

There is no monthly or platform fee. Rates are shown before you book, and each shipment is debited from the wallet when you book it. Most mill-to-garment-unit lots are invoiced on trade terms, so freight is a cost you carry until the buyer settles. If you also ship single rolls to retail buyers on cash on delivery, ShipSeth remits COD twice a week, every Tuesday and Friday; the COD remittance guide shows which payout a delivery lands in. See pricing for how the wallet works.

One lot, one LR

Check the Per-Kg Rate for Your Next Fabric Lot

Free to register. See parcel and B2B quotes side by side for your pincodes before you book.

Frequently Asked Questions

How do I calculate the weight of a fabric roll?
Multiply the metres on the roll by the fabric width in metres and by the GSM, then divide by 1,000 to get kilograms of cloth. Add the core tube and the wrapping. A 60-metre roll of 58-inch denim at 400 GSM is about 35.4 kg of fabric, roughly 37 kg with a 1.5 kg core.
Are fabric rolls charged by actual weight or volumetric weight?
By whichever is higher. The courier measures the roll as the box it would fit in: the packed length times the diameter times the diameter. Heavy, tightly wound cloth like denim or suiting usually bills on actual weight. Light georgette, net or loosely wound rolls on a thick core can bill on size.
Should I send fabric rolls as parcels or as B2B freight?
Send a single roll as whichever quote is cheaper; from 10 kg ShipSeth shows both. Send several rolls for the same buyer as one B2B consignment on one lorry receipt. Splitting them into separate parcels loses the single LR the buyer signs against and puts a parcel minimum on every roll.
What does a mill need to book a B2B fabric consignment on ShipSeth?
The GST tax invoice as a PDF, its invoice number and invoice amount, and the e-way bill number if the invoice is above ₹50,000. ShipSeth generates the lorry receipt and one label for each roll after booking.
Does 6 CFT or 8 CFT matter for fabric?
Only for lighter rolls. If a roll weighs 8 kg or more for every 30 cm cube of its box, both products bill the real kilos. Below 6 kg per cube, both bill size and 8 CFT counts about a third more kilos. The planner on this page shows which band your roll falls in.
What if the courier re-weighs my rolls and charges more?
Raise a weight dispute from the shipment in your ShipSeth dashboard. Choose whether the weight or the dimensions were correct, enter your declared figure, attach one to five photos and add a remark. A photo of the roll on the scale with its GSM tag visible, and a tape across the diameter, is the evidence that settles these.